Forward Look Network - Discussion TOC

Vote for The Forward Look Network on the Mopar Top 100 Sites

Welcome to Forward Look Discussion Forum archive.

You are free to enjoy all of the messages below, but it is not possible to reply here. For live discussions,
please check out the discussion forums.

November 2003 - January 2004

| Index | 2004/01 to 2003/11 | 2003/11 to 2003/06 | 2003/06 to 2003/02 | 2003/02 to 2002/11
| 2002/11 to 2002/08 | 2002/06 to 2002/02 | 2002/02 to 2001/09 | 2001/08 to 1999/10 |

re.disc brakes unimopar January 27, 2004

WALK ON THROUGH TO THE OTHER SIDE 60 dart January 26, 2004

Engine ID Drew January 25, 2004

1958 350 Daven Anderson January 25, 2004

Intake ID Tom January 25, 2004

Re: S-27/'57 D500/'58Ld2-M Intake Rodger January 25, 2004

Re: Intake ID rogerh January 25, 2004

Folks Deaner January 25, 2004

Re: Folks Tony in Idaho January 26, 2004

Re: Folks Pete January 25, 2004

Re: Folks Reuion alumcan January 25, 2004

Re: Folks Reuion Webmaster January 25, 2004

Re: Folks Reuion Deaner January 25, 2004

Re: BYOB is kinda like BYOP Tony in Idaho January 26, 2004

Re: Folks Reuion chuck lowe January 26, 2004

Disk brakes Tim January 25, 2004

Re: Disk brakes kelly January 25, 2004

Re: Disk brakes John Zastrow January 25, 2004

Re: Disk brakes Steve January 25, 2004

Re: Disk brakes Tim January 25, 2004

Re: Disk brakes alumcan January 25, 2004

Re: Disk brakes Tim January 25, 2004

Re: Disk brakes John Z January 25, 2004

Re: Disk brakes Steve January 27, 2004

For the last time! Kelly January 31, 2004

Re: Disk brakes Tim January 25, 2004

Re: Disk brakes Steve January 27, 2004

Re: Disk brakes chuck January 28, 2004

Re: Disk brakes John Serkaian January 29, 2004

Re: Disk brakes chuck January 29, 2004

LIFTERS IN 326 DODGE 59 HYD. PAUL January 25, 2004

Re: LIFTERS IN 326 DODGE 59 HYD. Melissa Hilburn January 25, 2004

Re: LIFTERS IN 326 DODGE 59 HYD. PAUL January 27, 2004

1960 d100 MODESTO, CA dario January 25, 2004

Re: 1960 d100 MODESTO, CA dario January 25, 2004

Re: don't let the crusher get it chuck lowe January 25, 2004

Re: don't let the crusher get it dario January 25, 2004

rear airconditioner availability ??? Dale January 24, 2004

Re: rear airconditioner availability ??? Rodger January 25, 2004

Re: rear airconditioner availability ??? Dale January 25, 2004

62 Wiper Blades Steve Hobby January 24, 2004

Re: 62 Wiper Blades Jeffc January 24, 2004

Re: 62 Wiper Blades Steve Hobby January 25, 2004

Re: 62 Wiper Blades Jeffc January 25, 2004

Re: 62 Wiper Blades Steve Hobby January 24, 2004

1957 Aventurer Russell Housen January 24, 2004

HEN'S TEETH chuck lowe January 24, 2004

Re: HEN'S TEETH naw,,,, alumcan January 24, 2004

Re: HEN'S TEETH naw,,,, chuck lowe January 24, 2004

Airconditioning Recharge? Aldo January 24, 2004

alumcan and chuck/birds of a feather flock together! chrycopsycho January 24, 2004

Eat me! alumcan January 24, 2004

Re: alumcan and chuck/birds of a feather flock together! chuck lowe January 24, 2004

'61 Dodge Wiring Problems Rob January 23, 2004

Re: '61 Dodge Wiring Problems roger January 23, 2004

'61 Dodge Wiring Problems Rob January 23, 2004

58 Dodge Sweptside engine rebuild Reg Evans January 23, 2004

58 dodge serria wgn kountkennedy January 23, 2004

Re: 58 dodge serria wgn roger January 23, 2004

Re: 58 dodge serria wgn Reg Evans January 23, 2004

What may a 241 go for? Patrick Olson January 23, 2004

LIFTERS IN 59 DODGE 326 V8 HYD. MAYOR January 23, 2004

56 dodge rear glass interchange chrycopsycho January 22, 2004

Re: 56 dodge rear glass interchange Marty Stewart January 23, 2004

Re: 56 dodge rear glass interchange Patrick Olson January 23, 2004

1956 Dodge and Plymouth 6 cylinders Surfer Bob January 22, 2004

Re: 1956 Dodge and Plymouth 6 cylinders Rodger January 22, 2004

59Dodge potmetal eyebrows need Paul kennedy A.K.A. KOUNT KENNEDY January 22, 2004

Re: 59Dodge potmetal eyebrows need BOB January 22, 2004

Test Webmaster January 22, 2004

'56 Desoto convt in Iraq Larry Gavin January 21, 2004

Re: '56 Desoto convt in Iraq Edward Petrus January 22, 2004

Car Creeps Ahead in Neutral. Why? Rob January 21, 2004

Re: Car Creeps Ahead in Neutral. Why? Ron January 23, 2004

Re: Car Creeps Ahead in Neutral.Out for revenge? chrycopsycho January 23, 2004

Re: Car Creeps Ahead in Neutral. Why? chuck lowe January 21, 2004

New web site! alumcan January 21, 2004

Re: New web site!New friends!New Attitude! chrycopsycho January 23, 2004

It's AWESOME, you'll love it :^D !! Daven Anderson January 21, 2004

Re: New web site! chuck lowe January 21, 2004

Re: New web site! Dave L. January 21, 2004

Dual Exhaust Reg Evans January 21, 2004

Re: Dual Exhaust Rodger January 21, 2004

Re: Dual Exhaust Reg January 22, 2004

Re: Dual Exhaust Rodger January 22, 2004

Re: Dual Exhaust Chris January 21, 2004

Re: Dual Exhaust Reg Evans January 21, 2004

'60 Chrysler grille swap Carter January 21, 2004

Re: '60 Chrysler grille swap chrycopsycho January 21, 2004

Re: '60 Chrysler grille swap Carter January 22, 2004

FRONT SEAL 59 DODGE TRANS. MAYOR January 21, 2004

power steering swap dwayne January 20, 2004

61 Plymouth on Dodge 880 wagons?!? Silverstead7 January 20, 2004

Re: 61 Plymouth on Dodge 880 wagons?!? rogerh January 25, 2004

Correct! 1962-64 Dodge 880 wagons basically '61 Plymouths Daven Anderson January 21, 2004

318/326 cam swap lou January 20, 2004

Re: 318/326 cam swap Hank Dozier January 20, 2004

Re: 318/326 cam swap Melissa Hilburn January 20, 2004

'61 Dodge Phoenix, Repro Rocker Panels Rob January 20, 2004

Possible sources: Dave L. January 21, 2004

318 wide block crankshaft in a 326? Melissa Hilburn January 20, 2004

Crank substitution Hank Dozier January 20, 2004

Re: Crank substitution jeffc January 20, 2004

Re: Crank substitution Hank Dozier January 20, 2004

Re: Crank substitution Melissa Hilburn January 20, 2004

'57 DeSoto Firelite Brake Problem jawbox January 20, 2004

Re: '57 DeSoto Firelite Brake Problem Jeffc January 20, 2004

spin on oil filter kit jason pitman January 19, 2004

Re: spin on oil filter kit Hank Dozier January 22, 2004

poly bellhousing bolt pattern vs later engine pattern narley charlie January 19, 2004

Re: poly bellhousing bolt pattern vs later engine pattern Paul Hoffmeyer January 20, 2004

Addendum to what Jeff said Daven Anderson January 19, 2004

Re: Daven, ? Jeffc January 20, 2004

The Early "Poly" seal Daven Anderson January 20, 2004

Re: poly bellhousing bolt pattern vs later engine pattern Jeffc January 19, 2004

flexible exhaust tubes roger January 18, 2004

Re: flexible exhaust tubes Marty Stewart January 18, 2004

Re: flexible exhaust tubes Kay January 18, 2004

Decode my Egine block! Patrick Olson January 18, 2004

Re: Decode my Egine block! Hank Dozier January 19, 2004

POWER BRAKE CONVERSION LENNY January 18, 2004

Re: POWER BRAKE CONVERSION John Z January 18, 2004

Rear axle swap Earl January 17, 2004

what about a cordoba rear? Kelly January 20, 2004

Re: what about a cordoba rear? Erik January 20, 2004

TRYING to get my dash apart... Adam January 17, 2004

Re: TRYING to get my dash apart... Hank Dozier January 17, 2004

Steering Box Doug Ruffell January 17, 2004

Re: Steering Box Deaner January 17, 2004

Third member swap Tim January 17, 2004

Re: Third member swap Jeffc January 17, 2004

Re: Third member swap Tim January 17, 2004

46 WC Dodge Truck Parts Steve Jones January 16, 2004

Re: 46 WC Dodge Truck Parts Dave L. January 16, 2004

Re: 46 WC Dodge Truck Parts Reg Evans January 17, 2004

57 CRL Brakes Bob Sherwin January 16, 2004

Re: 57 CRL Brakes Neil Vedder January 20, 2004

Re: 57 CRL Brakes Herman January 16, 2004

59 Plymouth Fury Windscreen Question John January 15, 2004

Re: 59 Plymouth Fury Windscreen Question rogerh January 16, 2004

Headliner Pete January 15, 2004

Re: Headliner Earl January 17, 2004

Re: Headliner GaryS January 16, 2004

1961 Dodge Phoenix 361 Rob January 15, 2004

Re: 1961 Dodge Phoenix 361 Ray January 16, 2004

Re: 1961 Dodge Phoenix 361 Joe Godec January 16, 2004

Re: 1961 Dodge Phoenix 361 horace January 16, 2004

Slack in steering box Tim January 15, 2004

Re: Slack in steering box Octie Ham January 19, 2004

Re: Slack in steering box Neil Vedder January 16, 2004

Re: Slack in steering box Tim January 16, 2004

Re: Slack in steering box jim mccauley January 15, 2004

Re: Slack in steering box Tim January 15, 2004

Re: Slack in steering box jim mc January 16, 2004

Solex glass replacement BHut January 15, 2004

Website Posting Shawn January 15, 2004

seeking George Laurie in Australia Tony in Idaho January 15, 2004

Re: seeking George Laurie in Australia al houghton January 15, 2004

48 Plymouth engine/trans conversion Tony Adamo January 15, 2004

Re: 48 Plymouth engine/trans conversion alumcan January 15, 2004

Re: 48 Plymouth engine/trans conversion chuck lowe January 15, 2004

Re: 48 Plymouth engine/trans conversion chuck January 15, 2004

Re: 48 Plymouth engine/trans conversion chuck lowe January 15, 2004

Paint Colours. cazzer January 15, 2004

Re: Paint Colours. GaryS January 16, 2004

Re: Paint Colours. alumcan January 15, 2004

Re: Paint Colours. cazzer January 15, 2004

Re: Paint Colours. alumcan January 15, 2004

Re: Paint Colours. cazzer January 16, 2004

Pre-stubbed header flange for poly 318? panic January 15, 2004

Too much crap on ebay,where's the beef! chrycopsycho January 15, 2004

Re: Too much crap on ebay,where's the beef! Earl January 17, 2004

Re: Too much crap on ebay,where's the beef! Tony January 17, 2004

removing engine and Transmission hints! tim knight January 15, 2004

Re: removing engine and Transmission hints! Dick Whelan January 18, 2004

Re: removing engine and Transmission hints! Hank Dozier January 15, 2004

Thanks Hank Sounds easy, when can you come over! tim knight January 15, 2004

Re: Your offer Hank Dozier January 16, 2004

Re: Its Been bloody hot here tim January 18, 2004

Re: removing engine and Transmission hints! Tim January 15, 2004

Use grade 8 bolts for strength N/M Dan January 18, 2004

Re: Use grade 8 bolts for strength N/M tim January 19, 2004

removing engine and Transmission hints! tim knight January 15, 2004

Swamp Coolers Rodger January 14, 2004

Re: Swamp Coolers Ted Gray January 17, 2004

Swamp Coolers Rodger January 14, 2004

Engine Swap from 325 Poly to 354 HEMI in 58 Dodge Milt Simon January 14, 2004

Re: Engine Swap from 325 Poly to 354 HEMI in 58 Dodge Herman January 16, 2004

Re: Engine Swap from 325 Poly to 354 HEMI in 58 Dodge Chris January 15, 2004

Re: Engine Swap from 325 Poly to 354 HEMI in 58 Dodge panic January 15, 2004

Re: Engine Swap from 325 Poly to 354 HEMI in 58 Dodge Mopar Randy January 15, 2004

Re: Engine Swap from 325 Poly to 354 HEMI in 58 Dodge Tim January 15, 2004

Poly 260? Patrick Olson January 14, 2004

blasting small parts chuck lowe January 14, 2004

59 D500 ENGINE BOB January 14, 2004

Re: 59 D500 ENGINE jim mccauley January 14, 2004

changing distributors on a 341 hemi jason pitman January 13, 2004

Re: changing distributors on a 341 hemi Hank Dozier January 14, 2004

Re: changing distributors on a 341 hemi Steve in KY January 14, 2004

Rear axel problems '59 DeSoto... Cowboy January 13, 2004

60 universal chuck lowe January 13, 2004

Re: 60 universal sid January 14, 2004

Re: 60 universal chuck lowe January 14, 2004

Re: 60 universal sid January 15, 2004

56 Savoy/Plymouth Options BHut January 12, 2004

Re: 56 Savoy/Plymouth Options Larry Gavin January 13, 2004

Re: 56 Savoy/Plymouth Options BHut January 13, 2004

Re: 56 Savoy/Plymouth Options horace January 13, 2004

Re: 56 Savoy/Plymouth Options Marty Stewart January 13, 2004

Re: 56 Savoy/Plymouth Options BHut January 13, 2004

Re: 56 Savoy/Plymouth Options Marty Stewart January 14, 2004

Re: 56 Savoy/Plymouth Options BHut January 14, 2004

automatic choke pierpaolo January 12, 2004

Re: automatic choke Hank Dozier January 13, 2004

Re: automatic choke pierpaolo January 13, 2004

Re: automatic choke Hank Dozier January 13, 2004

electric system pierpaolo January 12, 2004

Re: electric system BHut January 12, 2004

Re: electric system pierpaolo January 13, 2004

Positive to Negative ground conversion Hank Dozier January 13, 2004

Rear axle bearing, tapered or sealed? Eric Carlson January 12, 2004

Re: Rear axle bearing, tapered or sealed? Jeffc January 13, 2004

Setting the taper.....? Eric C. January 14, 2004

Re: Setting the taper.....? Jeffc January 15, 2004

1957 Fury Dash KAY January 12, 2004

Change of rear axel.. Cowboy January 12, 2004

Re: 46 Dodge Pickup Jim McCauley January 12, 2004

55-60 chuck lowe January 12, 2004

Original-style carpets for '55? Adam January 12, 2004

Re: Original-style carpets for '55? Hank Dozier January 13, 2004

1946 Dodge truck Steve Jones January 11, 2004

Re: 1946 Dodge truck Jim McCauley January 12, 2004

1961 DeSoto michael January 11, 2004

Re: 1961 DeSoto SMITTY January 15, 2004

A body Vs. B body trans Tim January 11, 2004

Re: A body Vs. B body trans Tom Noonan January 11, 2004

Re: A body Vs. B body trans Tim January 11, 2004

Re: A body Vs. B body A833 Daven Anderson January 11, 2004

Re: A body Vs. B body A833 Tim January 11, 2004

Cast Iron TF vs 727 TF rob January 11, 2004

Re: Cast Iron TF vs 727 TF paul e January 12, 2004

Use of 727 requires '62-up crankshaft Daven Anderson January 11, 2004

U joints on a 300G E Sullivan January 11, 2004

Re: U joints on a 300G Steve Hobby January 25, 2004

Air cleaner Dan January 10, 2004

Parting 57 wagon, what do you need? Brian Cooper January 10, 2004

Re:Hold that TIGER/Part that PUPPY Neil Vedde January 12, 2004

Re:Hold that TIGER/Part that PUPPY Brian Cooper January 12, 2004

Re:Hold that TIGER/Part that PUPPY Neil Vedder January 14, 2004

1959 Coronet Brake Problems Larry Coleman January 10, 2004

Re: 1959 Coronet Brake Problems Dan January 10, 2004

Re: 1959 Coronet Brake Problems Larry Coleman January 12, 2004

Re: 1959 Coronet Brake Problems Melissa Hilburn January 20, 2004

Cast Iron TorqueFlite Rob January 10, 2004

Re: Cast Iron TorqueFlite rogerh January 11, 2004

Re: Cast Iron TorqueFlite Hank Dozier January 10, 2004

Re: Cast Iron TorqueFlite chuck lowe January 10, 2004

head liner chuck lowe January 10, 2004

Re: head liner deaner January 10, 2004

61 chrysler trunk pan replacement.Cancer surgery! chrycopsycho January 09, 2004

Re: 61 chrysler trunk pan replacement.Cancer surgery! casey January 10, 2004

57 dodge mayfair 2 door hard top g,ross January 09, 2004

Re: 57 dodge mayfair 2 door hard top g,ross January 10, 2004

Re: 57 dodge mayfair 2 door hard top Thor Homanberg January 10, 2004

aluminum cased 727 with pushbutton Tim January 09, 2004

Aluminum-case Pushbutton 727's Daven Anderson January 10, 2004

vendor chuck lowe January 09, 2004

Re: vendor Dan January 10, 2004

Re: DAN chuck lowe January 10, 2004

Thanks Chcuk! N/M Dan January 10, 2004

Re: vendor rogerh January 10, 2004

Re: vendor casey January 09, 2004

Re: vendor jason pitman January 09, 2004

Re: vendor Mary Stewart January 09, 2004

Thoughts about self rebuild of powerflite transmission! tim January 09, 2004

Re: Thoughts about self rebuild of powerflite transmission! Hank Dozier January 10, 2004

Re: Thoughts about self rebuild of powerflite transmission! tim knight January 12, 2004

Re: Thoughts about self rebuild of powerflite transmission! Izzy Alvarez January 25, 2004

Convertable help BillG January 08, 2004

Re: Convertable help chuck lowe January 09, 2004

Re: Convertable help Bill G January 10, 2004

Re: Convertable help chuck lowe January 10, 2004

Different Yoke Sizes Tim January 08, 2004

Re: Different Yoke Sizes paul e January 09, 2004

Re: Different Yoke Sizes TIm January 09, 2004

Re: Different Yoke Sizes Jeffc January 09, 2004

Rear disc brakes for tapered axle Roger January 08, 2004

56 Plymouth Sedan Windshield rubber new twist? Marty Stewart January 08, 2004

Color code Thor Homanberg January 08, 2004

OOPS, 1958 had the color code tag Clif Davis January 08, 2004

Re: Color code Clif Davis January 08, 2004

361 to 383b BOB January 08, 2004

Re: 361 to 383b Joe Mac January 08, 2004

Rear Disc Brakes John Z January 07, 2004

drum seperation... kelly January 20, 2004

301 motor Steve Jones January 06, 2004

Re: 301 motor and options Hank Dozier January 07, 2004

Re: 301 motor Lee Lopes January 07, 2004

Re: 301 motor Steve Jones January 08, 2004

Re: 301 motor Lee Lopes January 08, 2004

1957plymouth fury VIN dottie January 06, 2004

Re: 1957plymouth fury VIN Clif Davis January 08, 2004

Disc brakes on a Dodge '60 André Eriksen January 06, 2004

Re: Disc brakes on a Dodge '60 chuck lowe January 06, 2004

Which motor mounts to use... André Eriksen January 06, 2004

Early Darts Dave L. January 06, 2004

rear end widths,,,, alumcan January 06, 2004

Re: rear end widths,,,, Ford yard alumcan January 06, 2004

Re: rear end widths,,,, Ford yard John Z January 07, 2004

junk prices alumcan January 07, 2004

Axle Measurements and swap Fred Lang January 05, 2004

Re: Axle Measurements and swap chrycopsycho January 05, 2004

57-64 fullsize axle flange to flange is 55 5/8" Daven Anderson January 06, 2004

Re: 57-64 fullsize axle flange to flange is 55 5/8"??????? alumcan January 07, 2004

'57-64 fullsize wagon rear assemblies same width as sedans Daven Anderson January 07, 2004

Re: 57-64 fullsize axle flange to flange is 55 5/8"??????? John Serkaian January 07, 2004

Re: Axle Measurements and swap John Serkaian January 05, 2004

Axle Measurements and swap Fred Lang January 05, 2004

59 power steering gear rebuild Octie Ham January 05, 2004

Re: 59 power steering gear rebuild jim mccauley January 06, 2004

WCFB's to AFB's / the 'other' Forwardlook web site alumcan January 05, 2004

Re: WCFB's to AFB's / the 'other' Forwardlook web site Allen January 05, 2004

Wonder why alumcan January 05, 2004

Re: the other "Alumcan" Website Jimmy January 05, 2004

Re: the other "Alumcan" Website THEY'RE F&$@&N' NUTS!!! alumcan January 05, 2004

Need help on part # Dale January 04, 2004

Tech advice on 1957 Plymouth (HELP) Charles January 03, 2004

Re: Tech advice on 1957 Plymouth (HELP) Charles January 04, 2004

Re: Tech advice on 1957 Plymouth (HELP) Pete January 04, 2004

Re: Tech advice on 1957 Plymouth (HELP) Brian Cooper January 04, 2004

Re: Tech advice on 1957 Plymouth (HELP) Dick Whelan January 04, 2004

Re: Tech advice on 1957 Plymouth (HELP) Mopar Randy January 03, 2004

First time with a cutting torch.Stand back! chrycopsycho January 03, 2004

Re: First time with a cutting torch.Stand back! Hank Dozier January 04, 2004

FORWARD LOOK CONTROL-----WE HAVE IGNITION !!!!!!!! chuck lowe January 02, 2004

Re: FORWARD LOOK CONTROL-----WE HAVE IGNITION !!!!!!!! Dick Whelan January 04, 2004

WE HAVE IGNITION !!What about liftoff!!! chrycopsycho January 02, 2004

WCFB to AFB alumcan January 02, 2004

Re: WCFB to AFB Mopar Randy January 02, 2004

Re: WCFB to AFB, bolt pattern/Chuckey Wuckey's orgasm alumcann January 02, 2004

Pushed the wrong dadburn button,,,,, alumcan January 02, 2004

Data Plate Decoding, 1961 Rob January 01, 2004

Re: Data Plate Decoding, 1961 Tony January 02, 2004

Re: Data Plate Decoding, 1961 Al Wilson January 02, 2004

Headers Eugene Sullivan January 01, 2004

Re: Headers Dwayne January 02, 2004

Re: Headers Herman Parker January 02, 2004

powerflite jumps into reverse jim mccauley December 31, 2003

Re: powerflite jumps into reverse Jeffc January 03, 2004

Re: powerflite jumps into reverse jim mccauley January 05, 2004

Crazy web site (s) alumcan December 31, 2003

Leaf springs at summit racing Timmo December 31, 2003

Re: Leaf springs at summit racing rex January 05, 2004

Re: Leaf springs at summit racing Tim January 05, 2004

Christine Deaner December 30, 2003

Re: Christine GaryS December 31, 2003

Freman's Dave L. December 31, 2003

NEW YEARS (?) alumcan December 30, 2003

Re: NEW YEARS (?) alumcan December 31, 2003

FINALLY!!!! The dadburn door got unlocked! 'Bout time!!! alumcan December 30, 2003

Re: FINALLY!!!! The dadburn door got unlocked! 'Bout time!!! Jimmy December 31, 2003

Got her into gear finally!!! chrycopsycho December 31, 2003

Re: Got her into gear finally!!! naughty consolation prize alumcan December 31, 2003

That "Christine" sound--- Zach Collie December 30, 2003

Re: That "Christine" sound--- Neil Vedder December 31, 2003

A recommendation Daven Anderson December 30, 2003

57 Fury Wheelcover Dick Whelan December 30, 2003

Re: 57 Fury Wheelcover Bob January 02, 2004

transmission oil everywhere?? tim December 30, 2003

Re: transmission oil everywhere?? Hank Dozier December 30, 2003

Re: transmission oil everywhere?? tim December 30, 2003

Re: transmission oil everywhere?? Zach Collie December 31, 2003

Re: transmission oil everywhere?? Paul e January 05, 2004

'58 Plymouth E-brake Bob December 29, 2003

Re: '58 Plymouth E-brake Dan December 30, 2003

Re: '58 Plymouth E-brake jim mccauley December 30, 2003

Ram induction question??????? Billy-Jack Ebare December 29, 2003

Re: Ram induction question??????? horace January 10, 2004

Re: Ram induction question??????? Joe Godec December 29, 2003

55 desoto a/c stuff Lee Lopes December 28, 2003

Re: 55 desoto a/c stuff roger December 28, 2003

Re: 55 desoto a/c stuff Lee Lopes December 29, 2003

Re: 55 desoto a/c stuff Hank Dozier December 29, 2003

Re: 55 desoto a/c stuff Lee Lopes December 29, 2003

Pulleys and belts Hank Dozier December 30, 2003

Re: 55 desoto a/c stuff Hank Dozier December 28, 2003

e-bay links karl December 27, 2003

Re: e-bay links Jonathan December 28, 2003

Can a 56 windsor 2drht be cloned into a 56 desoto? chrycopsycho December 27, 2003

Re: Can a 56 windsor 2drht be cloned into a 56 desoto? Hank Dozier December 27, 2003

Sadaam--last post sent before finishing! click on this one Brian December 27, 2003

Sadaam, the DeSoto fan Brian De Francesco December 27, 2003

Dodge/Plymouth 260/270 Hemi/Poly Block question Hank Dozier December 26, 2003

Re: Dodge/Plymouth 260/270 Hemi/Poly Block question Paul Hoffmeyer December 26, 2003

Re: Dodge/Plymouth 260/270 Hemi/Poly Block question Hank Dozier December 27, 2003

Blasting? Joey December 26, 2003

Re: Blasting? Peter January 14, 2004

Re: Blasting? Tony December 27, 2003

Re: Blasting? Deaner December 26, 2003

paint-$75 vs $413 per. gal. chuck lowe December 26, 2003

Re: paint-$75 vs $413 per. gal. Russ December 26, 2003

58 plymouth with smoothie wheels. pics inside kevin December 26, 2003

Re: 58 plymouth with smoothie wheels. pics inside John December 28, 2003

Re: 58 plymouth with smoothie wheels. pics inside Brad December 27, 2003

Re: 58 plymouth with smoothie wheels. pics inside Brian Cooper December 27, 2003

Re: 58 plymouth with smoothie wheels. pics inside chuck lowe December 26, 2003

Late 727 behind early 383 ???????????????? alan December 25, 2003

A Merry Mopar Christmas to all..... Billy-Jack Ebare December 25, 2003

New Issue of "Super Rod" Jonnie King December 25, 2003

Merry Chrystmas chrycopsycho December 24, 2003

ran when parked... sid December 23, 2003

Re: ran when parked... Chris December 31, 2003

Re: ran when parked...OPEN field when parked, too!!! Hank Dozier December 26, 2003

Logging as part of the restoration process!!! chrycopsycho December 26, 2003

Pt. 2- And you thought Joe Dirt's Daytona was a JOKE... Daven Anderson December 23, 2003

shaving a 57 torqueflite j.d. December 23, 2003

Re: shaving a 57 torqueflite j.d. December 24, 2003

Re: shaving a 57 torqueflite mike myhrvold December 24, 2003

CNC machining speeds up spacer fabrication Daven Anderson December 24, 2003

Re: shaving a 57 torqueflite Mike B December 23, 2003

Re: ran when parked... j.d. December 23, 2003

Alumcan:Santa sez you're not on list,checked twice! chrycopsycho December 23, 2003

Glad to rejoin the collective! Groupthink is good! chrycopsycho December 23, 2003

Original BOLT coatings '57 Imperial Mika Jaakkola December 23, 2003

"Chrysler Poly Performance" booklet finally available panic December 22, 2003

I finally recieved mny 1957 Plymouth Savoy! Joey Ramirez December 22, 2003

Re: blasting and photos chuck lowe December 23, 2003

Resto is a BLAST Neil Vedder December 23, 2003

Re: I finally recieved mny 1957 Plymouth Savoy! deaner December 22, 2003

Disc. brake my '59 DeSoto Cowboy December 22, 2003

OK - on DeSoto '59 Cowboy December 22, 2003

'58-61 crank flanges different from '62-up --- Brakes Daven Anderson December 22, 2003

Re: OK - on DeSoto '59 Jim Helm December 22, 2003

Re: OK - on DeSoto '59 Cowboy December 22, 2003

Re: OK - on DeSoto '59 Jim Helm December 22, 2003

'55 Dodge rear springs Sutton December 21, 2003

disc brake issues Kelly December 21, 2003

Re: disc brake issues Steve December 28, 2003

I did feel them dragging! Kelly January 05, 2004

AAJ kit and setup Hank Dozier December 26, 2003

Re: disc brake issues chuck December 22, 2003

Re: disc brake issues Daven Anderson December 21, 2003

Re: disc brake issues Tim December 21, 2003

Re: disc brake issues Steve December 21, 2003

Not here to trash! Kelly December 22, 2003

Re: disc brake issues Steve December 21, 2003

DeSoto - Dodge - Chrysler Cowboy December 21, 2003

'59 Fireflite is on Chrysler chassis with low block 383 Daven Anderson December 21, 2003

Re: DeSoto - Dodge - Chrysler GaryS December 21, 2003

Re: DeSoto - Dodge - Chrysler Cowboy December 21, 2003

Re: DeSoto - Dodge - Chrysler Jim Helm December 21, 2003

Re: DeSoto - Dodge - Chrysler Cowboy December 21, 2003

Re: DeSoto - Dodge - Chrysler Jim Helm December 21, 2003

Re: DeSoto - Dodge - Chrysler Jessica Hendricks December 31, 2003

383 cui. / disc. brakes 1959 DeSoto Cowboy December 21, 2003

Re: 383 cui. / 1959 DeSoto Rodger December 21, 2003

Re: 383 cui. / 1959 DeSoto Cowboy December 21, 2003

55 DODGE CORONET CARPET LENNY December 20, 2003

CANMAN"S LOCKED OUT ! WEMASTER CAN YOU HELP ? chuck lowe December 20, 2003

Some people may have to update their links/bookmarks because of the new server Daven Anderson December 20, 2003

DeSoto Engeneering books Bob December 19, 2003

sonoramic 413 Geoff Klein December 19, 2003

Re: sonoramic 413 Shock December 20, 2003

Re: sonoramic 413 Geoff Klein December 23, 2003

Steering Gear Rebuild Jim McCauley December 19, 2003

engine mayaln December 19, 2003

Re: engine Gary December 22, 2003

Re: engine panic December 21, 2003

New server for Forwardlook? Cathrine Karlsson December 19, 2003

Re: New server for Forwardlook? webmaster December 19, 2003

Re: New server for Forwardlook? Herman December 19, 2003

driveline vibration in 57 DeSoto Phil Helfrich December 19, 2003

Ooops! Kenny J. December 19, 2003

Re: driveline vibration in 57 DeSoto Kenny J. December 19, 2003

New server ffor Forwardlook? Thor Homanberg December 19, 2003

Did Sadaam crave DeSotos? Brian DeFrancesco December 18, 2003

is there a substitute for 59 Plymouth 2 dr hdtp windshield other than W453 dennis cloer December 18, 2003

Welcome to the new server! webamster December 18, 2003

Re: Welcome to the new server! roger December 18, 2003

Congratulations! Daven Anderson December 18, 2003

Thank You x 1000, Dave!!! Tony in Idaho December 18, 2003

Replacement antenna masts for 58 ? Sar December 15, 2003

Re: Replacement antenna masts for 58 ? Hank Dozier December 28, 2003

Re: Replacement antenna masts for 58 ? E-bay alumcan December 15, 2003

Dumb question for fearless leader and anybody else with 2 Cents Jimmy December 15, 2003

Re: Dumb question for fearless leader and anybody else with 2 Cents Hank Dozier December 28, 2003

Power Steering Gear rebuild Jim Helm December 15, 2003

Re: Power Steering Gear rebuild Mike Patterson December 15, 2003

Disc brake conversion Fast forword December 15, 2003

Re: Disc brake conversion Steve December 19, 2003

Re: Disc brake conversion Kelly December 15, 2003

on the topic... Kelly December 15, 2003

Re: Disc brake conversion Al T December 15, 2003

Re: Disc brake conversion Kenny J. December 15, 2003

P.S. Kenny J. December 15, 2003

oil canister seal Jason Pitman December 13, 2003

Re: oil canister seal Dave Davis December 15, 2003

Re: oil canister seal Hank Dozier December 15, 2003

Re: oil canister seal Brian Cooper December 14, 2003

1957 Convertble sun visors Thor Homanberg December 13, 2003

'61 Canadian Dodge D-500 - Feb. 2004 Mopar Muscle P.98 Daven Anderson December 13, 2003

Re: '58 Canadian Dodge/Plodge? alumcan December 13, 2003

I saw that TV movie too... Daven Anderson December 13, 2003

Can't say it's not "on topic" Mike B December 13, 2003

respect and responsibility roger December 12, 2003

Jessica, where are you when we need you!! jimmy December 15, 2003

Re: Jessica, where are you when we need you!! Jessica Hendricks December 15, 2003

Re: Jessica, where are you when we need you!! Kenny J. December 15, 2003

Re: respect and responsibility Good Grief,,,,,here they come. alumcan December 15, 2003

Re: respect and responsibility Good Grief,,,,,here they come. Kenny J. December 15, 2003

Good Grief,,,,,here they come. Again. alumcan December 15, 2003

Re: Good Grief,,,,,here they come. Again. Jim Helm December 15, 2003

zinc electroplating...has anyone done this at home? Arthur Ash III December 12, 2003

Re: zinc electroplating...has anyone done this at home? Timmy December 13, 2003

Re: zinc electroplating...has anyone done this at home? Furykay December 13, 2003

tail fins Deaner December 12, 2003

Rankin-Bass 1964 "Rudolph" Special? Daven Anderson December 13, 2003

Chrystmas questions:reindeer power vs horse power chrycopsycho December 12, 2003

Re: tail fins Exhaust alumcan December 12, 2003

steering wheel restoration Tony in Idaho December 12, 2003

Re: steering wheel restoration Jessica Hendricks December 13, 2003

Re: steering wheel restoration Dan December 13, 2003

THANKS BOB December 12, 2003

Fearless Leader alumcan December 12, 2003

I Need a Helper in Santa Monica, Looking for Paid Helper/Mechanic to help Assemble 60 Plymouths Milt Simon December 11, 2003

Ok, i might have a big problem now... Tim December 11, 2003

Crud on valves..... Hank Dozier December 12, 2003

Re: Crud on valves..... Tim December 12, 2003

PCV, etc Hank Dozier December 12, 2003

Re: PCV, etc Timmy December 13, 2003

Cleaning valves Tim December 12, 2003

Re: Cleaning valves exhaust guides alumcan` December 12, 2003

Re: Cleaning valves Hank Dozier December 12, 2003

Re: Cleaning valves Timmy December 13, 2003

Grow Up Jessica Hendricks December 11, 2003

Re: Grow Up Jimmy December 12, 2003

Jessica for Prez! Hank Dozier December 12, 2003

Jessica for Prez (save the environment, recycle old cars!) Daven Anderson December 13, 2003

Re: Who's gonna be the VEEP!? alumcan December 13, 2003

Agreed. Dave L. December 12, 2003

I don't want to grow up!I'm a man with midlifecrisisitis! chrycopsycho December 11, 2003

58 DeSoto Fireflite for sale Mike Cretella December 11, 2003

ENGINE ID. HELP FAST PLEASE BOB December 11, 2003

Re: ENGINE ID. HELP FAST PLEASE Jim Helm December 11, 2003

Re: ENGINE ID. HELP FAST PLEASE chuck lowe December 11, 2003

where can I get a gas tank for a 1950 plymouth 2door deluxe? Wilson Torres December 10, 2003

Re: where can I get a gas tank for a 1950 plymouth 2door deluxe? Dan December 12, 2003

Re: Water in a gas tank!? Asking for BIG trouble! If it don't blow up first! alumcan December 12, 2003

Re: where can I get a gas tank for a 1950 plymouth 2door deluxe? mike myhrvoldm December 12, 2003

Re: where can I get a gas tank for a 1950 plymouth 2door deluxe? Bill in SD December 11, 2003

Re: where can I get a gas tank for a 1950 plymouth 2door deluxe? alumcan December 10, 2003

Heater valve control Tor Gylterud December 10, 2003

Re: Heater valve control kelly December 10, 2003

Re: Heater valve control peter December 15, 2003

Plymmy Plymmie PLYMIE?? Neil Vedder December 10, 2003

What's my car worth? Adam December 09, 2003

Re: What's my car worth? Bill in SD December 11, 2003

Re: What's my car worth? Adam December 13, 2003

Re: What's my car worth? Mopar Randy December 10, 2003

Production at Chrysler limo/airport 1957-59? Joakim Larén December 09, 2003

Chrysler limo/airporter Dave L. December 09, 2003

Front end rebuild kits Dave Sankey December 09, 2003

GEE, I'm a TREE Neil Vedder December 10, 2003

Re: Front end rebuild kits Deaner December 09, 2003

Re: Front end rebuild kits chuck lowe December 09, 2003

Re: Front end rebuild kits David J December 09, 2003

58 N/Yer Brakes Bob Bush December 08, 2003

Re: 58 N/Yer Brakes Hank Dozier December 08, 2003

Re: 58 N/Yer Brakes Bob Bush December 09, 2003

Re: 58 N/Yer Brakes Bob Bush December 11, 2003

58 N/Yer Brake Master Cylinder packaging Hank Dozier December 12, 2003

Re: 58 N/Yer Brake Master Cylinder packaging Bob Bush December 12, 2003

Cover retention Hank Dozier December 15, 2003

Need ideas for rear suspension and axle Tim December 08, 2003

Re: Need ideas for rear suspension and axle chuck lowe December 13, 2003

Re: Need ideas for rear suspension and axle Neil Vedder December 09, 2003

Re: Need ideas for rear suspension and axle Tim December 09, 2003

Getting it UP Neil Vedder December 12, 2003

Re: Getting it UP Timmy December 13, 2003

Re: Getting it UP Hangs down!? alumcan December 13, 2003

'56 Belvedere chuck December 08, 2003

Re: '56 Belvedere GaryS December 10, 2003

Re: '56 Belvedere chuck December 09, 2003

Re: '56 Belvedere Jonnie King December 09, 2003

Re: '56 Belvedere Arthur Ash III December 08, 2003

Re: '56 Belvedere Marty Stewart December 08, 2003

I want snow!Send me some from east coast! chrycopsycho December 08, 2003

Re: I want snow! I got some fer sale,,,,,, alumcan December 08, 2003

I got some fer sale,,,,,,Too high bs content. chrycopsycho December 08, 2003

Re: I got some fer sale,,,,,,Too high bs content. Yeah. alumcan December 08, 2003

Restore info Dan December 05, 2003

Re: Restore info Furykay December 06, 2003

RE. rear a/c Dale December 05, 2003

Unsteady idle Timmy December 05, 2003

Re: Unsteady idle Ken Combs December 06, 2003

Re: Unsteady idle Mike Austin December 05, 2003

Re: Unsteady idle Tim December 06, 2003

Re: Unsteady idle Mike Austin December 05, 2003

Re: Unsteady idle Tim December 06, 2003

Re: Unsteady idle Mike Austin December 07, 2003

Tim, What is the condtiion of your radiator? Dan December 06, 2003

Re: Tim, What is the condtiion of your radiator? Tim December 07, 2003

Same as below Joe Wallace December 05, 2003

WWW.EMBLEMAGIC.COM Nathan Manning December 05, 2003

Re: WWW.EMBLEMAGIC.COM Chris December 06, 2003

Who makes Repro 1958 chrysler front emblems? Joe Wallace December 05, 2003

Calendar Carter December 05, 2003

Re: Calendar alumcan December 05, 2003

Re: Calendar Ray December 05, 2003

Re: Calendar webmaster December 19, 2003

(MOPAR) GOLD PLATED TORQUE WRENCH chuck lowe December 05, 2003

301 Poly Paul Hoffmeyer December 05, 2003

Rear A/C Dale December 04, 2003

Re: Rear A/C long ago in the archives alumcan December 05, 2003

Re: Rear A/C long ago in the archives Deaner December 05, 2003

Re: DEANER chuck lowe December 05, 2003

Re: DEANER deaner December 05, 2003

Re: diks-u-narry alumcan December 06, 2003

correct me if i am wrong j.d. December 04, 2003

301 poly power j.d. December 04, 2003

1957-58 Plymouth 2X4 bbl poly questions Jone December 04, 2003

re;5.7 hemi in 57dodge flicka December 04, 2003

need a few opinions mike December 04, 2003

Re: need a few opinions Switch wires around,,, alumcan December 04, 2003

Re: need a few opinions Switch wires around,,, mike December 04, 2003

Re: need a few opinions Switch wires around,,, Marty Stewart December 05, 2003

Mopar Matrix not working Eric Downunder December 04, 2003

Re: Mopar Matrix not working roger December 05, 2003

5.7 hemi install in 57 dodge flicka December 04, 2003

Other than electrics, Its all good! Kelly December 05, 2003

They could wait for the 2005 6.1L Hemi... Daven Anderson December 05, 2003

Re: 5.7 hemi install in 57 dodge Scott December 04, 2003

Re: 5.7 hemi install in 57 dodge OH! alumcan December 04, 2003

Re: 5.7 hemi install in 57 dodge?????? alumcan December 04, 2003

Re: 5.7 hemi install in 57 dodge Anthony Knight December 04, 2003

New Stephen King Movie with Fury Dottie December 04, 2003

Re: New Stephen King Movie with Fury LOOKIE HERE EINSTINE! alumcan December 04, 2003

Hadn't heard about this! (NO '60 Plymouth in the book version!) Daven Anderson December 05, 2003

Re: New Stephen King Movie with Fury anthony knight December 04, 2003

60 Desoto with fish bowl Brendan December 04, 2003

Re: 60 Desoto with fish bowl Brendan December 04, 2003

Re: 60 Desoto with fish bowl Billy-Jack Ebare December 04, 2003

Re: 60 Desoto with fish bowl Furykay December 04, 2003

Re: 60 Desoto with fish bowl Jonnie December 04, 2003

Re: 60 Desoto with fish bowl Mark December 09, 2003

Re: 60 Desoto with fish bowl Brendan December 04, 2003

I"M SORRY----BUT I HAVE TO RENEGE----ONE LAST TIME ! CHUCK LOWE December 04, 2003

Re: My thumb is allready out,,,,,,, alumcan December 04, 2003

wake this up bob December 04, 2003

Transmison worth Phil Herrold December 04, 2003

Re: Transmison worth ForwardLook Frank December 05, 2003

Re: Transmison worth! Give it to charity-Alumcan! chrycopsycho December 04, 2003

Re: Transmison worth! Give it to charity-Alumcan! don't want it,,, alumcan December 04, 2003

Stearing Phil Herrold December 04, 2003

1957 Plymouth Savoy Joey December 04, 2003

DO NOT SANDblast! Mike B December 04, 2003

Re: DO NOT SANDblast! 61hawk December 05, 2003

Re: DO NOT SANDblast! Marty Stewart December 05, 2003

Re: DO NOT SANDblast! 61hawk December 05, 2003

What is "Oil Can" Dan December 05, 2003

Re: What is "Oil Can" Same as mashing 'loomnum' cans,,,,, alumcan December 06, 2003

Re: What is "Oil Can" Same as mashing 'loomnum' cans,,,,, 61hawk December 08, 2003

Re: What is "Oil Can" Same as mashing 'loomnum' cans,,,,, Dan December 07, 2003

1957 Plymouth Savoy Joey December 04, 2003

Re: 1957 Plymouth Savoy Bill in SD December 12, 2003

58 dodge pickup colors horace December 03, 2003

57 301 poly performance j.d. December 03, 2003

Re: 57 301 poly performance Jan December 04, 2003

Re: 57 301 poly performance j.d. December 04, 2003

Re: 57 301 poly performance Geoff Klein December 04, 2003

Re: 57 301 poly performance Jan December 04, 2003

Re: stroker chuck lowe December 05, 2003

FREE 331 HEMI James December 03, 2003

Re: FREE 331 HEMI alumcan December 03, 2003

Heater Core Shawn Cripe December 03, 2003

Re: Heater Core Tom Noonan December 04, 2003

READING IS FUNDAMENTAL !!!!! chuck lowe December 03, 2003

Re: READING IS FUNDAMENTAL !!!!! sid December 03, 2003

throttle valve lever shaft seal. MAYOR December 02, 2003

1959 Canadian Dodge Dottie December 02, 2003

Re: 1959 Canadian Dodge Jim Helm December 03, 2003

Re: 1959 Canadian Dodge Jerry December 03, 2003

Re: 1959 Canadian Dodge Jim Helm December 03, 2003

Re: 1959 Canadian Dodge Dave L. December 03, 2003

Here Ya Go, Can... Broaden Your Horizons Nathan Manning December 02, 2003

Re: Knock me over with a feather,,,,, alumcan December 03, 2003

Oops... Forgot the most important part... Nathan Manning December 02, 2003

Early Hemi and Mopar small block V-8s silverstead7 December 02, 2003

Re: Early Hemi and Mopar small block V-8s panic December 04, 2003

Re: Early Hemi and Mopar small block V-8s chuck December 03, 2003

Re: Early Hemi and Mopar small block V-8s Hank Dozier December 03, 2003

Ancestry - Hemis to LAs Hank Dozier December 02, 2003

Re: Ancestry - Hemis to LAs Jeffc December 02, 2003

Why Daven gave up a stereo installation career (Sid will like this) Daven Anderson December 02, 2003

Amusing Postscript Daven Anderson December 03, 2003

Re: Amusing Postscript sid December 03, 2003

Daven for President!! J. Killmore December 02, 2003

Re: Daven for President!! sid December 02, 2003

Re: Why Daven gave up a stereo installation career (Sid will li... Jonnie December 02, 2003

Lars, Sid, Xmas, and gifts Lars (0f course...) December 02, 2003

Larspaintr@aol.com makes one VERY GOOD point... Daven Anderson December 02, 2003

Shop Manual Essential,Learn by Osmosis also! chrycopsycho December 02, 2003

SID & LARS chuck lowe December 02, 2003

I know F$%^&&*$ all but am eager to learn!Help Me! chrycopsycho December 01, 2003

No Problem...... Hank Dozier December 02, 2003

You're welcome Daven Anderson December 02, 2003

Re: I know F$%^&&*$ all but am eager to learn!Help Me! alumcan December 02, 2003

Lars.... Sharpen your sword... Your in for a war!!! Billy-Jack Ebare December 01, 2003

"The pen is mightier than the sword" Daven Anderson December 03, 2003

Re: Lars.... Sharpen your sword... Your in for a war!!! Jason in Utah December 02, 2003

331 Hemi value James December 01, 2003

Temp guage and Fuel tank sender repairs tim December 01, 2003

Re: Temp guage and Fuel tank sender repairs alumcan December 01, 2003

Re: Temp guage and Fuel tank sender repairs tim December 02, 2003

Re: Temp guage and Fuel tank sender repairs Furykay December 02, 2003

Re: Brand New Core fitted already tim December 02, 2003

power steering fluid pierpaolo December 01, 2003

Re: power steering fluid Hank Dozier December 01, 2003

Re: power steering fluid pierpaolo December 06, 2003

Chroming oval air cleaners Dean December 01, 2003

Re: Chroming oval air cleaners alumcan December 02, 2003

(rolling eyes) J. Killmore December 01, 2003

whoops!...this is for lars Killmore December 01, 2003

Where in the heck does one find... J. Killmore December 01, 2003

Re: Where in the heck does one find... GaryS December 02, 2003

THANK YOU!!!! J. Killmore December 02, 2003

Re: Where in the heck does one find... Hank Dozier December 01, 2003

63 New Yorker wiper arms on a 60 Dodge Polara? Douglas Gregg December 01, 2003

Watch Out, Doug! Nathan Manning December 01, 2003

Continued Ignorance or what to ask for, for Dec 25. Lars December 01, 2003

Re: Continued Ignorance or what to ask for, for Dec 25. Kris' helper December 02, 2003

Sorry, Alumcan, LARS is the real board 'wake-er-upper'! Daven Anderson December 02, 2003

Re: Continued Ignorance or what to ask for, for Dec 25. sid December 01, 2003

Re: Continued Ignorance or what to ask for, for Dec 25. Cazzer December 02, 2003

Re: BASTARDIZING IS FUN CHUCK LOWE December 01, 2003

Re: BASTARDIZING IS FUN sid December 01, 2003

Re: BASTARDIZING IS FUN CHUCK LOWE December 02, 2003

Re: BASTARDIZING IS FUN sid December 02, 2003

Re: BASTARDIZING IS FUN Whoo-Haw!! alumcan December 01, 2003

Re: BASTARDIZING IS FUN Whoo-Haw!! I can't help it,,,, alumcan December 02, 2003

Re: hullaballoos chuck lowe December 02, 2003

Re: BASTARDIZING IS FUN Jason in Utah December 01, 2003

Re: BASTARDIZING IS FUN Anthony Knight December 02, 2003

Re: BASTARDIZING IS FUN/ then check 'thisin' out! alumcan December 03, 2003

Re: Way to be a jerk Jason in Utah December 01, 2003

Re: Way to be a jerk / you're saying it wrong alumcan December 02, 2003

Re: Way to be a jerk / you're saying it wrong Jason in UTah December 02, 2003

Re: Way to be a jerk sid December 01, 2003

Re: Way to be a jerk Jason in Utah December 01, 2003

Larspaintr@aol.com Daven Anderson December 01, 2003

Re: Larspaintr@aol.com alumcan December 01, 2003

Continued ARROGANCE... Or, what to ask for when you alienate others... Nathan Manning December 01, 2003

Re: OK I'll bite,,,,,,,, alumcan December 01, 2003

Re: OK I'll bite,,,,,,,, panic December 04, 2003

Re:KWANZAA chuck lowe December 01, 2003

Re:KWANZAA alumcan December 01, 2003

Re: Continued Ignorance or what to ask for, for Dec 25. jimmy December 01, 2003

Re: Hot Damn! A war is brewing! alumcan December 01, 2003

Re:and you thought you were going to wake up the board Jason in Utah December 01, 2003

Re:and you thought you were going to wake up the board,,,,, alumcan December 01, 2003

Pursuing Trivial Feces Neil Vedder December 02, 2003

cable shift chuck lowe November 30, 2003

Re: cable shift Jonnie December 01, 2003

Re: cable shift mike myhrvold December 01, 2003

Re: cable shift alumcan December 01, 2003

Re: cable shift, 65 last year cable shift case Jeffc December 01, 2003

Re: cable shift, 65 last year cable shift case paul e December 04, 2003

Re: cable shift, 65 last year cable shift case chuck lowe December 04, 2003

I'm gonna wake this board up,,,,,,Christine question,,,,useless trivia alumcan November 30, 2003

Re: I'm gonna wake this board up,,,,,,Christine question,,,,usele... Drew November 30, 2003

NO, its' not Dennis' '68 Charger... Daven Anderson December 01, 2003

Re: Nope Drew,,,,, Einstine, you be still! alumcan December 01, 2003

What about Buddy Repperton's '67 Camaro? Daven Anderson November 30, 2003

Re: What about Buddy Repperton's '67 Camaro? alumcan November 30, 2003

Re: What about Buddy Repperton's '67 Camaro? Anthony Knight December 01, 2003

Re: Nope, not Junkin's 'Dippy' alumcan December 01, 2003

Junkins had a '76-'78 Plymouth Fury sedan Daven Anderson December 02, 2003

Re: Nope, not Junkin's 'Dippy' Jonathan December 01, 2003

Re: Nope, not Junkin's 'Dippy' alumcan December 01, 2003

Christine? Jonathan December 01, 2003

Re: Christine? Nope. Tell 'em Einstine alumcan December 01, 2003

Hint for the board: "Moochie Welch" Daven Anderson December 02, 2003

Re: Hint for the board: "Moochie Welch" Tim December 02, 2003

Re: Hint for the board: "Moochie Welch" alumcan December 02, 2003

1957 Dodge Truck Gizmo November 30, 2003

Re: 1957 Dodge Truck Jason in Utah December 01, 2003

Re: 1957 Dodge Truck horace November 30, 2003

Re: 1957 Dodge Truck Boondox November 30, 2003

Thanksgiving Chuck November 27, 2003

Re: Thanksgiving alumcan November 27, 2003

230 six cylinder engine weight dpicard November 26, 2003

Re: 230 six cylinder engine weight Rodger November 27, 2003

57-58' Leaf spring question john November 26, 2003

Re: 57-58' Leaf spring question Bill in SD November 28, 2003

Re: 57-58' Leaf spring question Neil Vedder November 27, 2003

Re: 57-58' Leaf spring question Mike Austin November 26, 2003

Re: 57-58' Leaf spring question Hank Dozier November 26, 2003

Re: 57-58' Leaf spring question Kelly November 26, 2003

Quest for christine:winter plans for summer hunt! chrycopsycho November 25, 2003

Re: Quest for christine:winter plans for summer hunt! Buddy Repperton November 29, 2003

Re: Quest for christine:winter plans for summer hunt! Jimmy November 26, 2003

Re: Quest for christine:winter plans for summer hunt! Billy-Jack Ebare November 26, 2003

Re: Quest for christine:winter plans for summer hunt! Herman Parker November 28, 2003

Re: Quest for christine:winter plans for summer hunt! Marty Stewart November 28, 2003

58 Suburban Question Mark November 24, 2003

1960 Dodge Pioneer--Body Shops in Conn. /Mass.? Beth R. Harris November 24, 2003

Re: 1960 Dodge Pioneer--Body Shops in Conn. /Mass.? Herman November 25, 2003

318 poly into a 61 Plymouth 2 dr george November 24, 2003

Re: 318 poly into a 61 Plymouth 2 dr chuck lowe November 27, 2003

Re: 318 poly into a 61 Plymouth 2 dr George November 27, 2003

Re: 318 poly into a 61 Plymouth 2 dr.Just do it! chrycopsycho November 24, 2003

Re: 318 poly into a 61 Plymouth 2 dr.Just do it! george November 25, 2003

Re: 318 poly into a 61 Plymouth 2 dr.Just do it! sid November 26, 2003

Dont drink V8,drive it! chrycopsycho November 25, 2003

Re: 318 poly into a 61 Plymouth 2 dr karl November 24, 2003

car kulture deluxe magazine, issue #9 sid November 24, 2003

Great Magazine Nathan Manning November 24, 2003

Need a fuel pump for '56 Dodge Custom Sierra Wagon Airstreamer November 24, 2003

Re: Need a fuel pump for '56 Dodge Custom Sierra Wagon Jonnie November 25, 2003

'77 Cordoba (400eng./auto) Jonnie November 24, 2003

Re: '77 Cordoba (400eng./auto) Joe Mac November 24, 2003

Re: '77 Cordoba (400eng./auto) Rodger November 24, 2003

Loadflite to carb linkage Boondox November 23, 2003

Re: Loadflite to carb linkage Herman Parker November 23, 2003

Re: Loadflite to carb linkage Jeffc November 23, 2003

Re: Loadflite to carb linkage Herman Parker November 23, 2003

Re: Loadflite to carb linkage Boondox November 23, 2003

Re: Loadflite to carb linkage Jeffc November 24, 2003

Re: Loadflite to carb linkage David J November 25, 2003

Re: Loadflite to carb linkage Jeffc November 26, 2003

Re: Loadflite to carb linkage David J November 26, 2003

63-64 chryslers loat1e November 23, 2003

Re: 63-64 chryslers Joey M November 23, 2003

Re: 63-64 chryslers GaryS November 23, 2003

Re: and this ain't one of them chuck lowe November 23, 2003

Polishing trim...how do I do it? Arthur Ash III November 22, 2003

Re: Polishing trim...how do I do it? chuck lowe November 23, 2003

Re: Polishing trim...how do I do it? Here's how I do it alumcan November 23, 2003

Re: Polishing trim...how do I do it? Steve November 22, 2003

Bumper Wing Mounting Aldo November 22, 2003

Re: Bumper Wing Mounting Furykay November 22, 2003

VENTED OR NOT........THE BEATING CONTINUES?? Jason in Utah November 22, 2003

drill a hole! RogerH November 24, 2003

Re: drill a hole! Jason in Utah November 25, 2003

Re: VENTED OR NOT........THE BEATING CONTINUES?? Jeffc November 23, 2003

Re: VENTED OR NOT........THE BEATING CONTINUES?? jason in Utah November 25, 2003

Re: VENTED OR NOT........THE BEATING CONTINUES?? Mike B November 22, 2003

Re: VENTED OR NOT........THE BEATING CONTINUES?? Jason in Utah November 25, 2003

Re: VENTED OR NOT........THE BEATING CONTINUES?? John Z November 22, 2003

Valve train lifter noise at acceleration 392 hemi Mike Austin November 22, 2003

Re: Valve train lifter noise at acceleration 392 hemi Tom Noonan November 24, 2003

Re: Valve train lifter noise at acceleration 392 hemi Herman Parker November 24, 2003

Re: Valve train lifter noise at acceleration 392 hemi big Mike November 24, 2003

Re: Valve train lifter noise at acceleration 392 hemi Tom Noonan November 24, 2003

Re: Valve train lifter noise at acceleration 392 hemi Mike Austin November 25, 2003

Petty Blue paint code Roger November 22, 2003

Re: Petty Blue paint code Kelly November 24, 2003

Re: Petty Blue paint code/ scatpack.com alumcan November 22, 2003

1960 polara trim codes! chuck lowe November 22, 2003

Re: 1960 polara trim codes! Dave November 23, 2003

Parts search in the 'wanted' section ????? it's on E-bay alumcan November 22, 2003

Re: Parts search in the 'wanted' section ????? it's on E-bay chuck lowe November 22, 2003

Link to pics of a Rotisserie and a compleate rebuild. (not mopar but lots of information.) Dan November 21, 2003

Ohhh This is so close but the last thing I need. Marty Stewart November 21, 2003

1955 Dodge headlights don't work Mark November 21, 2003

Re: 1955 Dodge headlights don't work Mark November 21, 2003

Don't forget the Hi/LO switch! Mike B November 21, 2003

Re: Don't forget the Hi/LO switch! Mark November 26, 2003

Re: 1955 Dodge headlights don't work Dan November 21, 2003

Re: 1955 Dodge headlights don't work Silverstead7 November 21, 2003

I think i fixed my sending unit!!(though its the wrong one) Jason in Utah November 20, 2003

VENTED OR NOT??? (gas cap question) Jason in Utah November 20, 2003

Re: VENTED OR NOT??? (gas cap question) Jason in Utah November 21, 2003

Re: VENTED OR NOT??? (gas cap question) rogerh November 21, 2003

Re: VENTED OR NOT??? (gas cap question) Jason in Utah November 21, 2003

Re: VENTED OR NOT??? (gas cap question) Mike B November 21, 2003

Re: VENTED OR NOT??? (gas cap question) rogerh November 21, 2003

Re: VENTED OR NOT??? (gas cap question) Mike B November 21, 2003

Re: VENTED OR NOT??? (gas cap question) rogerh November 21, 2003

Re: VENTED OR NOT??? (gas cap question) roger November 21, 2003

Re: VENTED OR NOT??? (gas cap question) sid November 21, 2003

Re: VENTED OR NOT??? (gas cap question) go with vented alumcan November 20, 2003

Re: VENTED OR NOT??? (gas cap question) go with vented Jason in Utah November 21, 2003

Rear ends... Kelly November 20, 2003

What did become of that rear disc kit... Kelly November 21, 2003

Rear disc kit...Axles...Sway bars Hank Dozier November 21, 2003

Re: Rear disc kit...Axles...Sway bars/listen up, or go into the archives alumcan November 22, 2003

Re: Rear ends... John Z November 20, 2003

Re: Rear ends... disc brake, better yet. alumcan November 20, 2003

Re: Axle Assembly Rodger November 20, 2003

331 Chrysler Hemi worth Todd November 20, 2003

Re: 331 Chrysler Hemi worth Steve in KY November 21, 2003

Re: 331 Chrysler Hemi worth Todd November 21, 2003

Re: 331 Chrysler Hemi worth Mopar Randy November 20, 2003

Re: 331 Chrysler Hemi worth Todd November 21, 2003

Re: 331 Chrysler Hemi worth Pete November 23, 2003

Re: 331 Chrysler Hemi worth James November 24, 2003

56 Ply sport suburban to Switzerland lars November 20, 2003

BELLOWS CHECK VALVE chuck lowe November 20, 2003

Re: BELLOWS CHECK VALVE Hank Dozier November 20, 2003

Re: BELLOWS CHECK VALVE/100% sealed one way only C valve alumcan November 20, 2003

P 28 Oil Sending unit connection Brent November 19, 2003

Engine miss at constant speed - Solved tim November 19, 2003

Re: Engine miss at constant speed - Solved Dan November 19, 2003

Re: Engine miss at constant speed - Solved tim November 19, 2003

Costs of the restoration hobby Bill in SD November 19, 2003

Another point of view and...the last word :-) Bill in SD November 24, 2003

Re: Another point of view and...the last word :-)-NOT YET chuck lowe November 25, 2003

Re: Costs of the restoration hobby RAL November 21, 2003

Re: Costs of the restoration hobby Furykay November 22, 2003

Re: Costs of the restoration hobby Bill in SD November 20, 2003

Scan Tool Costs Hank Dozier November 21, 2003

Re: Costs of the restoration hobby casey November 19, 2003

Re: Costs of the restoration hobby Mike B November 19, 2003

Re: Costs of the restoration hobby Joe Mac November 19, 2003

If its a hobby OK - Business is Different! tim November 19, 2003

'56 Ply Windshield Gasket Chuck November 19, 2003

Re: '56 Ply Windshield Gasket Lars November 19, 2003

Re: '56 Ply Windshield Gasket Dan November 19, 2003

Re: '56 Ply Windshield Gasket lars November 20, 2003

Re: '56 Ply Windshield Gasket chuck November 20, 2003

Re: '56 Ply Windshield Gasket:I got one on ice! chrycopsycho November 21, 2003

who's got an answer for this one ???? chuck lowe November 18, 2003

Re: who's got an answer for this one ???? R Duke November 21, 2003

Re: who's got an answer for this one ???? Clyde November 19, 2003

Solenoids for automatics usually have connection to neutral safety switch Daven Anderson November 18, 2003

Re: who's got an answer for this one ???? Al Houghton November 18, 2003

Car transport from Oregon to Idaho - Help!!! Tony in Idaho November 18, 2003

Re: Car transport from Oregon to Idaho - Help!!! jimmy November 19, 2003

Dome light connection Gerrit November 18, 2003

Coupling between alternator and ps pump, and replacement sparkplug wire boots Brian Wolschlager November 18, 2003

Re: Coupling between alternator and ps pump, and replacement spar... Hank Dozier November 18, 2003

57-58 front suspension interchangeablity Chris November 17, 2003

Best source for carbs Boondox November 17, 2003

Give these guys a call. Nathan Manning November 17, 2003

1957 New Yorker with 300 C Motor ??? Jim Gehrke November 17, 2003

Re: 1957 New Yorker with 300 C Motor ??? Daven Anderson November 17, 2003

Trimmed down the board a bit Webmaster November 17, 2003

59 New Yorker Steering column - help please Chris November 17, 2003

Re: 59 New Yorker Steering column - help please Jim Helm November 17, 2003

Re: 59 New Yorker Steering column - help please Chris November 19, 2003

need a 2 barrel carb mike r November 17, 2003

Re: need a 2 barrel carb Tim November 17, 2003

392 spark plugs Mike Austin November 16, 2003

392 Spark plugs Tim November 16, 2003

Engine miss at constant speed - Could it be the CARB? tim November 16, 2003

Re: Engine miss at constant speed - Could it be the CARB? Ron Allyn Swartley November 17, 2003

Re: Could it be the CARB? Naw! It's Elvis himself! alumcan November 17, 2003

Re: Engine miss at constant speed - Could it be the CARB? Dan November 16, 2003

Re: Engine miss at constant speed - Could it be the CARB? tim November 16, 2003

Re: Engine miss at constant speed - Could it be the CARB? Dan November 17, 2003

Re: Engine miss at constant speed - Could it be the CARB? Hank Dozier November 16, 2003

Highway HI FI NOS player and all 42 NOS records Lee Exline November 16, 2003

59 Plymouth rare documents and Owners Manual Tony November 16, 2003

Torsion Bar Data Needed Herman Parker November 16, 2003

Re: Torsion Bar Data Needed John Serkaian November 17, 2003

Re: Torsion Bar Data Needed sid November 16, 2003

Re: Torsion Bar Data Needed Herman Parker November 16, 2003

great project--61 dart chuck lowe November 16, 2003

prices of junkbeach-boy beach-boy November 15, 2003

Re: prices of junkbeach-boy Bill K. November 18, 2003

Re: prices of junkbeach-boy Billy-Jack Ebare November 16, 2003

Re: prices of junkbeach-boy Dan November 17, 2003

Re: prices of junkbeach-boy Mike Patterson November 16, 2003

Re: prices of junkbeach-boy casey November 15, 2003

Re: prices of junkbeach-boy Mike B November 15, 2003

Re: prices of junkbeach-boy chuck lowe November 16, 2003

My Point Exactly! Mike B November 16, 2003

Re: Paint Costs Herman Parker November 16, 2003

Re: Paint Costs Hank Dozier November 16, 2003

Early bird gets the worm!Slowpoke gets the dirt! chrycopsycho November 17, 2003

Re: Early bird gets the worm!Slowpoke gets the dirt! Bill K. November 18, 2003

Re: Early bird gets the worm! True. + lots of patience/persistence alumcan November 17, 2003

the right place at the right time HELPS ! chuck lowe November 17, 2003

Re: Paint Costs chuck November 16, 2003

Re: Paint Costs Hank Dozier November 16, 2003

Re: prices of junkbeach-boy chuck lowe November 16, 2003

prices of junkbeach-boy beach-boy November 15, 2003

Re: prices of junkbeach-boy Jason in Utah November 16, 2003

Re: prices of junkbeach-boy Allen Malanowski November 20, 2003

Re:children first,projects second1 chrycopsycho November 21, 2003

Radial tire swap Lou November 15, 2003

Re: Radial tire swap Lou November 17, 2003

Re: Radial tire swap Ron Allyn Swartley November 17, 2003

Re: Radial tire swap Dave L. November 16, 2003

Re: Radial tire swap Mopar Randy November 16, 2003

Re: Radial tire swap lars November 17, 2003

727 interchangability/shift linkage Bill K. November 15, 2003

Re: 727 interchangability/shift linkage Jeffc November 16, 2003

Re: 727 interchangability/shift linkage Bill K. November 18, 2003

Re: 727 interchangability/shift linkage Jeffc November 18, 2003

Re: 727 interchangability/shift linkage Bill K. November 18, 2003

Re: 727 interchangability/shift linkage Jeffc November 19, 2003

Steering wheel free play John November 14, 2003

1960-61 Dodge/Plymouth rarity Silverstead7 November 14, 2003

Re: 1960-61 Dodge/Plymouth rarity Mike B November 14, 2003

Steering wheel free play John November 14, 2003

Re: Steering wheel free play roger November 14, 2003

Re: Steering wheel free play rogerh November 14, 2003

1960 Polara interior codes Dave Rodgers November 13, 2003

Torqueflite TC rebuild for Hank Dozier Lee Lopes November 13, 2003

Re: Torqueflite TC rebuild for Hank Dozier Hank Dozier November 13, 2003

Contact Info JOey M November 13, 2003

Re: Contact Info Lee Lopes November 14, 2003

one wire lars! November 13, 2003

59 Dodge color names & numbers Tony in Idaho November 13, 2003

Re: 59 Dodge color names & numbers Tony in Australia November 13, 2003

ONE WIRE ALTS. chuck lowe November 12, 2003

Re: ONE WIRE ALTS are for dummies Angelo November 13, 2003

I SURELY HOPE YOU ARE NOT CALLING ME A DUMMY chuck lowe November 14, 2003

Re: I SURELY HOPE YOU ARE NOT CALLING ME A DUMMY Angelo November 14, 2003

Re: I SURELY HOPE YOU ARE NOT CALLING ME A DUMMY chuck lowe November 14, 2003

Re: ONE WIRE ALTS.---no reg. chuck lowe November 13, 2003

my $0.02 Kelly November 14, 2003

Re: ONE WIRE ALTS.---no reg. Hank Dozier November 13, 2003

Re: ONE WIRE ALTS. bob swanberg November 12, 2003

Help with 55 Desoto factory A/C pics Lee Lopes November 12, 2003

1959 Desoto Diplomat. Janet November 12, 2003

Re: 1959 Desoto Diplomat. Ian November 13, 2003

Re: 1959 Desoto Diplomat. janet November 14, 2003

Re: 1959 Desoto Diplomat. Ian November 14, 2003

727 or 904 Lee Aanderud November 12, 2003

Re: 727 or 904 panic November 13, 2003

Re: 727 or 904 alumcan November 12, 2003

Definitely the 727 ('51-53 Hemis have the extended bellhousing) Daven Anderson November 14, 2003

Re: 727 or 904 alumcan November 12, 2003

Re: 727 or 904 Lee Aanderud November 12, 2003

Re: 727 or 904 Jeffc November 12, 2003

engine miss at constant speed - whats up? tim November 12, 2003

Re: engine miss at constant speed - whats up? panic November 13, 2003

Re: engine miss at constant speed - whats up? Dan November 12, 2003

Re: engine miss at constant speed - whats up? Dave November 12, 2003

Re: engine miss at constant speed - whats up? Joel Bourdeau November 12, 2003

Re: engine miss at constant speed - whats up? Hank Dozier November 12, 2003

Re: engine miss at constant speed - whats up? Lee Lopes November 12, 2003

TC rebuilding sources Hank Dozier November 12, 2003

Re: TC rebuilding sources Lee Lopes November 13, 2003

Electrical gremlins tim November 12, 2003

Re: Electrical gremlins Jeffc November 12, 2003

354 hemi into 60 new yorker. Mopar stew! chrycopsycho November 10, 2003

I also need '60 New Yorker motor answers Bill K. November 12, 2003

Use the 413 that came with it! Daven Anderson November 11, 2003

What 413! Rustfree body with no motor or tran! chrycopsycho November 11, 2003

OK then, use the 361, your beer budget will thank you! Daven Anderson November 12, 2003

Re: What 413! Rustfree body with no motor or tran! Geoff Klein November 12, 2003

Re: 354 hemi into 60 new yorker. Mopar stew! Jerry Witts November 11, 2003

Re: 354 hemi into 60 new yorker. Mopar stew! panic November 11, 2003

Wiper refills Jason in Utah November 10, 2003

Re: Wiper refills Jeffc November 12, 2003

Torsionbars again Jounik November 10, 2003

Re: Torsionbars again JOHNNY G OCALA FLORIDA November 12, 2003

Re: Torsionbars again Mike B November 11, 2003

Re: Torsionbars again John Serkaian November 15, 2003

Re: Torsionbars again Herman Parker November 16, 2003

Re: Torsionbars again Jounik November 13, 2003

55 Chrysler wiring Jim Lusk November 10, 2003

Re: 55 Chrysler wiring Adam November 24, 2003

58 DeSoto Fireflite brakes Mike Cretella November 09, 2003

Re: 58 DeSoto Fireflite brakes rogerh November 10, 2003

Re: 58 DeSoto Fireflite brakes Dan November 09, 2003

Re: 58 DeSoto Fireflite brakes Al Houghton November 09, 2003

61PLY. P/S UNIT INTO 59 DODGE STANDARD MAYOR November 08, 2003

Thats cool Kelly November 10, 2003

Last changed: March 03, 2024