|
|
| Vote for The Forward Look Network on the Mopar Top 100 Sites |
From: Tim
Email: chevelle7dss@hotmail.com
Remote Name: 68.44.117.94
Date: January 25, 2004
I think his problem was due to the pushrod being too long. I know my pushrod is not the problem. I did some researching today and from what i've read you cannot use a drum brake master cylinder on disk brakes because of the residual pressure built into the master clinder, or it would cause the brakes to drag, as in my case. I will have to do some work to get the dual resevoir to fit.
