RE: IML: Rubber fuel line question..

["Rob P" <fristpenny@xxxxxxxxxxx>]

> From: "Dick Benjamin" <dickb@xxxxxxxxx>
>
> Yes, 30R9 is expensive, but it's a lot cheaper than replacing the car due 
> to
> a fire!

Thanks Dick.  I don't mind the expense of 30R9 hose if it's better hose.  
The real problem is the lack of availability.  Around here they sell the 
30R9 hose in an 18" package that screams "EFI HOSE!!" at $8 a pop.  Plus, 
there was only one on the shelf.  The 30R7 hose is sold bulk so that I could 
just chop off 3 feet and be done with it.  Guess I'm doing it 18" at a time. 
 I'm probably going to try to reduce the amount of rubber hose eventually 
anyway.  What's the spec on the high pressure hose?  My Laser has a high 
pressure (55lb) in tank pump and needs hose with a higher bursting point.  I 
assume the 90's Imps require similar.

Rob




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm