Yes, I remember that discussion. It was about the rear drums. I don't know what years A-body Mopars used that type of setup on the front drums. People use swedged and swaged as terms to describe the studs. I looked up the previous discussion Ray mentioned. It was posted by a member of this Mail List. Go to http://www.hotrodsandhemis.com/ and click on the "1964 Dodge Polara" button on the left, then scroll to the bottom of that page and click on the "Modern Drums for Tapered Axle Rear Ends" link. P.S., Here are some additional resources: http://www.fordgarage.com/pages/swaging.htm is an example of swaged/ swedged studs. There is a brake drum swedge cutting tool is available to buy. https://goodson.com/products/swedge-tools?variant=33471737798 is an example. There's also a DIY version: http://www.binderplanet.com/forums/index.php?threads/poor-mans-swage-cutter.130261/ Thanks, Gary H. > -------Original Message------- > > You certainly can buy the drums separately... > .... > This is why I said his question wasn't answered. And I don't accept > that it's a 'machine shop job' either. I would certainly do it myself. > And there's been a 'how to' on this mailing list previously about how > to do exactly the same thing with rear drums - without a machine shop > seeing them. It included information about later model wheel lugs > which didn't require swaging, which would be the same for the front. > > Ray > > -- -- -- Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en. --- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/20191128155804.18046.qmail%40server309.com.