[Chrysler300] 1957 crankshaft pulley A/C car

["Russell Roe" <saxblower@xxxxxxxxxx>]

I need the crankshaft pulley or pulleys for a 1957 392 hemi motor for a 300C with factory Air conditioning......mine looks  to be 2 pulleys....each with 2 grooves....they fit together making a 4 groove pulley.....the inner 2 grooves closer to the engine block are smaller in diameter..approx 6 inches....the outer pulley is about 7 1/4 in diameter and has 2 grooves...the car has factory a/c....the pulley fell off after only being on the motor for 51 years and naturally it was at 40mph and I ran over it and ruined it.......it stands about 4 1/2 inches tall ..that would be the measurement from the rear where it bolts to the harmonic balancer to the front of the pulley near the radiator.......I hope this all makes sense and also hope one of you has what I need and wants to part with it..........thanks in advance   Rusty Roe in Hermiston Oregon 1957 300c # 3N572550

[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/