Re: [Chrysler300] Linkage part

["Moana & Gerry Steinberg" <mopar@xxxx>]

Phil: Try Jeff Carter, JC Auto Restorations, Seattle, WA
Ph. 206/363-5270---Fax 206/440-7461
e-mail: jcauto@xxxx
He has repo linkage for 'F' & 'Gs', may have them your 'K'.
Good Luck.
Gerry Steinberg, Arizona

----- Original Message ----- 
From: "Phil Greenfeld" <pgreen413@xxxx>
To: <chrysler300@xxxxxxxxxxxxxxx>
Sent: Sunday, February 16, 2003 6:32 PM
Subject: [Chrysler300] Linkage part


> Hello I wanted to know if anyone knows about the linkage set-up from
> a 1964 300K. Along the firewall there is a ten inch rod that goes on the
> 
> top of the linkage holding it together, anyways I am in need of this.
> Can I
> just get a ten inch price of rod from Home Depot? Also the rod going to
> the carb is supposed to have a lil nipple on it to fit into the linkage
> on the
> carb the rod I have does not have this. What can I do to fit it onto the
> 
> carb?
> Thanks for the help AGAIN!!
> Phil