Fender Mounted Turn Signal

[dardal@xxxxxxxxxxxxxxx]

Quoting Mark McDonald <tomswift@xxxxxxxxxxxxx>:
> Pardon me, Dick B, if I put this wrong, but the turn signal & the
> taillights
> are on the same circuit, since the turn signal is supposed to activate
> when
> your taillights are blinking.  If one of your taillights is out, it
> can't
> blink, therefore your turn signal ain't gonna work, either.  Get
> somebody to
> check to see if all your rear lights are working.  

Mark, I am not EE like Dick, but I am quite confident these are not connected 
in series but in parallel.  So, even if all bulbs are gone at the back, the 
front should still blink...   D^2