I converted my original 392 distributor to electronic with a Pertronix ignition kit. The car now starts better, runs smoother, and gained 2-3 mpg. >From: danny owen <dannobowen@xxxxxxxxxxx> >Reply-To: mailing-list@xxxxxxxxxxxxxxxx >To: mailing-list@xxxxxxxxxxxxxxxx >Subject: Re: IML: Electronic Distributor in a 392 >Date: Fri, 26 Apr 2002 18:56:56 -0700 > >At 09:24 PM 4/25/02, you wrote: >>I don't have any information about these electronic distributors - I've >>never had a problem with the original type that I couldn't fix myself. I >>doubt I could say that about an electronic one. >> >>Dick Benjamin, > >Some of the hot rod magazines dealt with this a few years ago. A late model >small block distributor will work but I believe there has to be an >extension put on the shaft to make it work. HotHeads or another of the >aftermarket distributors should be able to help you. You might want to pick >up a Street Rodder magazine and check out their ads, as there are several >that deal with the early hemis. >Danny > >>----- Original Message ----- >>From: <Denjohn7@xxxxxxx> >>To: <mailing-list@xxxxxxxxxxxxxxxx> >>Sent: Thursday, April 25, 2002 5:49 PM >>Subject: IML: Dick Benjamin & List >> >> >> > I've a 58, with 392 Hemi , & want to put in an electronic distributor >>set >>up >> > in it, and remember that someone on line said they did this, or that it >>can >> > be done. If anyone knows the part, and part number with a posable price >>I >> > would defiantly appreciate it. The local parts shop said they could get >>some >> > part that will due the job, at over $200.00 Steep in my estimation! >> > Denis, Redwood City, Ca. >> > >> > >> > >> > ----------------- http://www.imperialclub.com ----------------- >> > This message was sent to you by the Imperial Mailing List. Please >> > reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be >> > shared with everyone. Private messages (and attachments) for the >> > Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx >> > To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm >> > >> > >> >> >>