New Edelbrock 1406 Installation../ 3/8 - 5/16
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

New Edelbrock 1406 Installation../ 3/8 - 5/16



While the 5/16 will fit the 3/8 (with a little lubricant), I have seen brass reducers that allow connections of hoses with different IDs.   

 

-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of Steve B.
Sent: Tuesday, March 23, 2004 10:12 PM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: RE: IML: New Edelbrock 1406 Installation../ 3/8 - 5/16

 

>One thing to keep in mind is that the carb nipple requires 3/8 hose but the stock fuel line is 5/16. I have the Carter >replacement for my 69 & am facing the same situation. Some have suggested giving the clamp a "couple extra turns" on the >5/16 end. Any thoughts on this?

>John

 

You can get the 5/16 line over the carb fitting pretty easily.  Lubricate it a little and push it right on.

 

                                  Steve B.

 



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.