Radiator/ Electric Fan / Controller Help

[Bill M <y1topbanana73@xxxxxxxxx>]

Even though I've always stuck with stock style configurations when it comes to anything to do my car, I'm tired of being scared of sitting in traffic, and watching my temperature rise. 

I'm seriously thinking about getting an aluminum radiator and electric fan combination (never used one before). So far I'm leaning towards Champion radiators (lifetime warranty), three core set up, and a 16 in single Spal puller fan, and harness w/controller. The above package is $500 shipped.

But I'm a little concerned about their harness and as it seems to have some light wiring gauges.

https://www.championradiators.com/Single-Fan-Relay

https://www.championradiators.com/Thermostat-relay-kit-instruction

Not sure whether I should maybe use a "Spal" harness and controller like this...

https://www.jegs.com/p/SPAL/SPAL-Electric-Fan-Wiring-Harness-Kits/2861422/10002/-1

The other issue is that the above controllers have a set temperature (185 on I believe). Should i use a programmable setup like this instead if i want to tweak the temp?

https://www.speedcooling.com/wiring-kits/

Any insight would be appreciated.

Thanks

Bill M 

-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/d/optout.