Re: Jacking safely
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Jacking safely



At the risk of stating the obvious, once you get it up, put a pair of
good solid jack stands under the frame.  Don't rely on the floor jack
only to save your life and limbs.

- Jim
Jim Altemose, Long Island, NY
'63 Polara 500 (Max Wedge)
'63 Polara 500 (383)
'65 Belvedere I (Street Wedge)
'71 Bronco

On Sun, Jul 10, 2011 at 2:32 PM, Walter Hodges <redbaronpdx@xxxxxxxxx> wrote:
> Thanks to you all for the great info!   What a knowledgeable and generous
> group of people.
> I feel much more confident now.  This is my first "old car" in a few years
> after having driven
> one of those uber reliable newer cars for awhile.  Kinda changes the ol
> mindset when I leave
> the house....tool box in the trunk, spare parts in the box,  cell phone
> charged, etc.
> It's an adventure!
> Thanks again.
> Walt
>
>
>
> ________________________________
> From: Eric Sturgis <ericsturgis@xxxxxxxxx>
> To: 1962to1965mopars@xxxxxxxxxxxxxxxx
> Sent: Sunday, July 10, 2011 9:16 AM
> Subject: Re: Jacking safely
>
> Hi Walt, Nice to meet somebody else from the PNW.  There are a few of us up
> here.  I currently have a 1962 Chrysler Newport 2 door HT....none of that
> "A" body "B" body etc stuff.  I got me a full size land yatch!  I did have
> many years ago in my youth a 1963 Valiant Convertible...that was the uglyest
> thing on wheels....except the wagon of the same year.  I seem to remember
> that all of the frame was very stonge on my little car and I never had any
> issues about jacking it up.  My current car you can jack it up on any of the
> frame and it could care less.  I'm sure there is a "no, no" place on the
> frame to put the jack, but I can't think of one.  I would just stay away
> from the floors and other sheet metal, unless you like that extra high hump
> in the passenger compartment or the crinkles up side panels.  Here are some
> pics to help a bit.  Green spots are ok to jack it up, the red bits are
> not.  unless you like dents....that's your choice.  :D
>
> On Sun, Jul 10, 2011 at 7:06 AM, Richard Kinsley
> <leroar.kinsley058@xxxxxxxxx> wrote:
>
> You are well within our scope. A really nice little car.
> I don't worry much about any special points for jacking up my car. I usually
> place the jack on the center of the k-frame to raise the front and on the
> sides at the point where the frame members come together.  In the rear I
> place the jack either under the center of the diff or on the spring perches
> on the axle. That's what I do.
> Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
>
> On Sat, Jul 9, 2011 at 11:33 PM, Walter Hodges <redbaronpdx@xxxxxxxxx>
> wrote:
>
> Hi all.  I'm a new member to this group.  I realize my '65 Valiant
> convertible is a little
> out of the scope of this group,  but she is a mopar!
>
> This is my very first vintage convertible car and I'm a little nervous about
> the correct/safe/no frame tweak
> method of jacking it up.   I'm limited to using a floor jack.  Ok to do one
> corner at a time
> using the usual 4 lifting points from the shop manual?
>
> Thanks for any help with my goofy question.
> Walt
> Portland OR
>
>
>
> --
> --
> Please address private mail -- mail of interest to only one person --
> directly to that person. That is, send parts/car transactions and
> negotiations as well as other personal messages only to the intended
> recipient, not to the Clubhouse public address. This practice will protect
> your privacy, reduce the total volume of mail and fine tune the content
> signal to Mopar topic. Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> --
> You received this message because you are subscribed to the Google Groups
> "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> http://groups.google.com/group/1962to1965mopars?hl=en.
>
>
>
> --
> Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
> --
> --
> Please address private mail -- mail of interest to only one person --
> directly to that person. That is, send parts/car transactions and
> negotiations as well as other personal messages only to the intended
> recipient, not to the Clubhouse public address. This practice will protect
> your privacy, reduce the total volume of mail and fine tune the content
> signal to Mopar topic. Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> --
> You received this message because you are subscribed to the Google Groups
> "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> http://groups.google.com/group/1962to1965mopars?hl=en.
>
> --
> --
> Please address private mail -- mail of interest to only one person --
> directly to that person. That is, send parts/car transactions and
> negotiations as well as other personal messages only to the intended
> recipient, not to the Clubhouse public address. This practice will protect
> your privacy, reduce the total volume of mail and fine tune the content
> signal to Mopar topic. Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> --
> You received this message because you are subscribed to the Google Groups
> "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> http://groups.google.com/group/1962to1965mopars?hl=en.
>
>
> --
> --
> Please address private mail -- mail of interest to only one person --
> directly to that person. That is, send parts/car transactions and
> negotiations as well as other personal messages only to the intended
> recipient, not to the Clubhouse public address. This practice will protect
> your privacy, reduce the total volume of mail and fine tune the content
> signal to Mopar topic. Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> --
> You received this message because you are subscribed to the Google Groups
> "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> http://groups.google.com/group/1962to1965mopars?hl=en.
>

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.