I haven't actually looked at the back of the speedo on my 63 Fury but there was a wick on the back of my 66 Charger's speedo so I assume your 64 should have one. It should be on the back of the housing where the cable goes in to be able to oil the brass bushing. It may just be a small hole on the top of the housing but there's cotton in there. I used a light machine oil like 3 in 1.
Dan Mc----- Original Message ----- From: "SB" <polecat2@xxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx> Sent: Monday, March 09, 2009 11:48 PM Subject: RE: Speedo lube
I don't know how you should oil your speedo, but I've seen those factory oiling wicks, but only on much older cars. Rich Kinsley wrote:Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies I remember that someone said there was a "wick" on the speedo to lube it about every 40years. I have my speedo on the table and don't see any wick or lube point. I know oiling a watch isn't a good thing. I did it once and it looked like a helicopter! What should I use and where? I have a new cable already and it bounced a lot before and a very little now. Suggestions?
---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines:http://www.1962to1965mopar.ornocar.org/mletiq.html.