RE: green bearing questions
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: green bearing questions



Earl, you are correct 73 & up A - Body's with 83/4 are 41/2 bolt pattern. I
had a 68 formula S Barracuda that I up graded to 41/2 & disc brakes. It was
a bolt in swap from a 73 340 Duster. Also, my old parts bolted right back
into the Duster!! 
 
 Herb 
 
1963 Sport Fury Convertible 361 
1970 Challenger RT 440 
1999 Durango SLT 5.9 
2006 300-C Heritage 5.7 
2008 SRT-8 Magnum 6.1 
St. Louis, MO. 


-------Original Message------- 
 
From: Earl H. 
Date: 8/8/2008 9:25:33 AM 
To: 1962to1965mopars@xxxxxxxxxx 
Subject: RE: green bearing questiuons 
 
Neal, 
 
You probably have an old set of C body axles laying around. 
Have them cut down and re-splined. Way cheaper, and will 
Work just fine. You can find 4.5 bolt pattern A body axles 
>From 73 & later Dusters. Not very common, but 83/4 rears 
Came in 340 & some 360 cars. 
 
Earl


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.