RE: Re-upholstering? ? ?

[Don Owen <d4owe9@xxxxxxxxxxx>]

Great Help...thanks very much Steve.

Donny, 64 Belvedere
 
> To: 1962to1965mopars@xxxxxxxxxx
> From: sderby@xxxxxxxxxxx
> Subject: Re: Re-upholstering? ? ?
> Date: Tue, 8 Jun 2010 15:48:23 -0700
> 
> 
> I am using this glue know that comes in a can with a brush. I like it 
> because it does not get all over like a spray type glue if I am working in a 
> car IE: headliner install. It is used for replacing vinyl mouldings on cars. 
> It is called MOULD FAST Vinyl moulding and emblem cement. You put it on each 
> surface, let it tack off and then stick it together like contact cement. And 
> it sticks good, but you cannot pull off and reset to tighten etc, so you 
> have to reapply the glue to manipulate the vinyl.
> 
> But if you want a good all purpose glue that works well, use a spray on 
> glue that is used for vinyl tops. It has alot of good qualities like:
> -longer working time, so it is easy to move around
> -heat does not affect it
> -it is designed for gluing vinyl to metal
> -3M makes it in a can still and I buy it from NAPA or my upholstery supplier
> 
> It is called 3M 80 Supertrim Adhesive for Rubbers and Vinyls (vinyl top 
> rated glue)
> 
> If you use a foam to foam type adhesive, it eats into the foam to make the 
> bond. If used on metal, I find it does not bond well with the metal and when 
> the car gets hot, the glue becomes soft and can pull apart. Vinyl top glue 
> is designed not to do this so IMHO it is a good all purpose adhesive to use 
> on any part of the interior.
> 
> Clear as mud right?
> cheers
> Steve
> 
> 
> 
> ----- Original Message ----- 
> From: "Don Owen" <d4owe9@xxxxxxxxxxx>
> To: "Mopar Discussion Group" <1962to1965mopars@xxxxxxxxxx>
> Sent: Tuesday, June 08, 2010 12:01 PM
> Subject: RE: Re-upholstering? ? ?
> 
> 
> >
> >
> >
> > Dear Steve The Upholtery Man:
> > Related Question if you don't mind:
> > What is that yellowish glue (and where can one get it)
> >
> > which is used on our cars for gluing vinyl to steel
> >
> > surfaces, eg door panel assemblies. This stuff appears to be brushed on, 
> > and looks a little like yellow
> >
> > weatherstrip adhesive. If not this stuff, what do you recommend. Thanks 
> > very much,
> >
> > Donny, 64 Belvedere
> >
> >> To: 1962to1965mopars@xxxxxxxxxx
> >> From: sderby@xxxxxxxxxxx
> >> Subject: Re: Re-upholstering? ? ?
> >> Date: Tue, 8 Jun 2010 09:47:23 -0700
> >>
> >>
> >> John,
> >> I am an upholsterer. In my humble opinion, unless you want something
> >> radically different, or go to Tijuana for a mexi job, very few, if any,
> >> upholsterers will be able to do it cheaper than say legendary or some 
> >> other
> >> aftermarket seat company. It is very time consuming to make patterns, buy
> >> material and build them. If you want to do yourself, make sure you use 
> >> your
> >> old set as a pattern, cut every piece on the seams with a razor blade, I
> >> then use an old iron to iron out the old seats, lay them on the new 
> >> vinyl,
> >> cut out and sew together exactly the same. You will need a welting foot 
> >> to
> >> make welts etc. and an industrial machine to sew.Also my 2 cents is 
> >> always
> >> get new foam if possible, you will have a tighter fitting cover that will
> >> fill out the corners and believe me you won't believe the different 
> >> between
> >> that and old dead 40 year old foam.
> >> For the best bang for your buck, buy the kit and re and re. You can do 
> >> that
> >> yourself quite easily and save the labour and have a factory looking job
> >> very easily.
> >> cheers
> >> Steve
> >> ----- Original Message ----- 
> >> From: "John Pettitt" <john.pettitt@xxxxxxxxxxxxx>
> >> To: <1962to1965mopars@xxxxxxxxxx>
> >> Sent: Tuesday, June 08, 2010 9:29 AM
> >> Subject: Re-upholstering? ? ?
> >>
> >>
> >> >
> >> > Quick question. Give me all your various thoughts on the matter.
> >> >
> >> > I am wanting to re-upholster the seats in my '65 Coronet.
> >> >
> >> > 1) Is this something that I could learn to do?
> >> >
> >> > 2) If I did it myself, is it something I would be able to do , where I
> >> > would be pleased with the end product?
> >> >
> >> > 3) Are there any good instruction books, or web-sites on the topic?
> >> >
> >> > 4) Would I be better off paying someone to do it?
> >> >
> >> >
> >> > Thanks for all your responses.
> >> >
> >> > John
> >> >
> >> >
> >> > ----
> >> > Please address private mail -- mail of interest to only one person -- 
> >> > directly to that person. I.e., send parts/car transactions and
> >> > negotiations as well as other personal messages only to the intended
> >> > recipient, not to the Clubhouse public address. This practice will 
> >> > protect
> >> > your privacy, reduce the total volume of mail and fine tune the content
> >> > signal to Mopar topic. Thanks!
> >> >
> >> > 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> >> > http://www.1962to1965mopar.ornocar.org/mletiq.html and
> >> > http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> >> >
> >> >
> >> >
> >>
> >>
> >> ----
> >> Please address private mail -- mail of interest to only one person -- 
> >> directly to that person. I.e., send parts/car transactions and 
> >> negotiations as well as other personal messages only to the intended 
> >> recipient, not to the Clubhouse public address. This practice will 
> >> protect your privacy, reduce the total volume of mail and fine tune the 
> >> content signal to Mopar topic. Thanks!
> >>
> >> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> >> http://www.1962to1965mopar.ornocar.org/mletiq.html and 
> >> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> >>
> >>
> >
> > _________________________________________________________________
> > The New Busy think 9 to 5 is a cute idea. Combine multiple calendars with 
> > Hotmail.
> > http://www.windowslive.com/campaign/thenewbusy?tile=multicalendar&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_5
> > --
> > [Non-text portions of this message have been removed]
> >
> >
> > ----
> > Please address private mail -- mail of interest to only one person -- 
> > directly to that person. I.e., send parts/car transactions and 
> > negotiations as well as other personal messages only to the intended 
> > recipient, not to the Clubhouse public address. This practice will protect 
> > your privacy, reduce the total volume of mail and fine tune the content 
> > signal to Mopar topic. Thanks!
> >
> > 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html and 
> > http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> >
> >
> > 
> 
> 
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
> 
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 
> 
> 
 		 	   		  
_________________________________________________________________
Hotmail is redefining busy with tools for the New Busy. Get more from your inbox.
http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_2
--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.