[Chrysler300] 1961 Chrysler Rear Bumper SEAL ???
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] 1961 Chrysler Rear Bumper SEAL ???

Does anyone know whats correct as far as the SEAL for the Rear Bumper ?
I have a piece that's shaped and short enough to just  be attached to the body with clips at the center of the bumper. Not having it right here with me,  it's about 2 feet long.
When I looked at the Mark Knutsen's 300G Disassembly photos I see the same piece and it's short just like the piece that I have.

I also have a SEAL from a 1961 New Yorker and it is long enough to go the full width of the rear bumper. There are holes , with original clips, every 6" to 8 ". I do not have the New Yorker to look for the mounting holes.

If the short SEAL on the G is correct and the long SEAL on the New Yorker is correct.....why would they be different? 
Also, looking at the G there are no holes to the left and right of the center to accept the clips.

When you look in the parts book the picture shows a long seal that would go from end to end.



Posted by: Charlie V <cv300g@xxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use


Home Back to the Home of the Forward Look Network Archive Sitemap

Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.