Re: [Chrysler300] 440 Engines and Cross Rams
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 440 Engines and Cross Rams





Forgot to mention, mine is coupled to a '62 transmission. Nothing special to connect that I am aware of.

Sent from my iPad

On Nov 9, 2017, at 11:38 AM, paul paulholm@xxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

On 11/9/2017 12:20 PM, danakolaia@xxxxxxxxx [Chrysler300] wrote:

> Has anyone out there used the Cross Ram setup with a 440 engine? Are
> there any potential issues to be considered? Thanks!

remember this, the tides of marching onward and upward are often
hampered by the special crossram cam needing special attention
to the CAM TIMING as others have oft repeated in this forum.

Typing that, someone 15 or so years ago added FI bungs to a set
of crossram mannyfolds and made that run.

the 440 block has been done several times with cross rams, the extra
cubics dont hurt as I understand it.

--
Paul Holmgren
The history of liberty is a history of resistance.
The history of liberty is a history of limitations
of governmental power, not the increase of it.
- Woodrow Wilson, New York, September 9, 1912



__._,_.___

Posted by: Lindsey <lindsey@xxxxxxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.