On 11/9/2017 12:20 PM, danakolaia@xxxxxxxxx [Chrysler300] wrote: > Has anyone out there used the Cross Ram setup with a 440 engine? Are > there any potential issues to be considered? Thanks! remember this, the tides of marching onward and upward are often hampered by the special crossram cam needing special attention to the CAM TIMING as others have oft repeated in this forum. Typing that, someone 15 or so years ago added FI bungs to a set of crossram mannyfolds and made that run. the 440 block has been done several times with cross rams, the extra cubics dont hurt as I understand it. -- Paul Holmgren The history of liberty is a history of resistance. The history of liberty is a history of limitations of governmental power, not the increase of it. - Woodrow Wilson, New York, September 9, 1912 ------------------------------------ Posted by: paul <paulholm@xxxxxxxxxxxxx> ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/