RE: [Chrysler300] Radio??

["Rich Barber" <c300@xxxxxxx>]

Most radios have a low-amperage inline fuse in the hot wire feeding the
radio.  The fuse and/or the contacts in the fuse holder can go bad.

-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of MRS954@xxxxxxx
Sent: Monday, April 21, 2008 10:39 AM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] Radio??

Jim,
The key must be on for the radio to operate. You must also let the
radio?warm up before you get any noise out of it. It's got some tubes in it
and it will take about 45 seconds to a minute for them to warm up.

Regards,
Mark Souders
300H
Mohrsville, PA




-----Original Message-----
From: Jim Maiani <jmaiani@xxxxxxxxxxx>
To: Chrysler300@xxxxxxxxxxxxxxx
Sent: Mon, 21 Apr 2008 1:04 pm
Subject: [Chrysler300] Radio??



Hello club...I hope this isn't a stupid question, but I don't remember how
it 
was in my 62 Newport when I was 16.  Anyway,  when I bought my 62-H last
fall, 
the radio didn't work.   Does the radio need the key on to work?  I know my 
power windows don't need the key to operate, but I don't remember about the 
radio.  I know someone out there knows.....

thanks 

Jim Maiani
Houghton Lake MI
300-H


  ----- Original Message ----- 
  From: Warren Anderson 
  To: Chrysler300@xxxxxxxxxxxxxxx ; Bob Jasinski 
  Sent: Monday, April 21, 2008 12:57 PM
  Subject: Re: [Chrysler300] Fluid for convertible top mechanism



  I do know for sure that petroleum based anything in a hydraulic brake
system 
that is designed for DOT 3 fluid is disasterous. DOT 4 can be used in place
of 
DOT 3 but is mostly used in European cars and has higher temp specs than
does 
DOT 3.

  I just replaced all the rubber pieces in a three ton truck that had dump
bed 
hydraulic fluid in the hydraulic brake system. Cost to reverse that little 
mistake cost the upfitter a back charge close to 6K. Anything petroleum
based 
does not belong anywhere near a hydraulic brake system and it would seem 
reasonable to me to extend that thinking to a top mechanism also. 

  Warren Anderson
  Sedona,AZ

  [Non-text portions of this message have been removed]



   

[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups
Links






[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups
Links








------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/