Roger,I had a 55 Plymouth and had to replace the "U" tube heater hose with another one that I think fit an early Mustang. I got it at my local NAPA dealer. I can't remember the hose number, but it was formed like a "U" and all I had to do was cut it to length and it fit just fine. If only I could find the number. Jack in Shinglehouse, Pa where Winter is fast approaching----- Original Message ----- From: "Jan & Roger van Hoy" <vanhilla@xxxxxxxxxxxx> To: <L-FORWARDLOOK@xxxxxxxxxxxxx> Sent: Thursday, October 28, 2010 11:02 PM Subject: Re: [FWDLK] Tubes I've got a question for you '56 Plymouth guys, it the lower hose to the heater valve a specially formed hose? I tryed to use regular stock hose and it woudn't bend sharply enough, had to use a lot longer piece to get it to curve.--Roger van Hoy----- Original Message ----- From: "Matt Proske" <mproske@xxxxxxxxxxxxx>To: <L-FORWARDLOOK@xxxxxxxxxxxxx> Sent: Thursday, October 28, 2010 5:10 PM Subject: [FWDLK] TubesAs shown in the image, mine has the bent tube on bottom. ************************************************************* To unsubscribe or set your subscription options, please go to http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1--------------------------------------------------------------------------------Matt Mobile ************************************************************* To unsubscribe or set your subscription options, please go to http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1-------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.comVersion: 8.5.448 / Virus Database: 271.1.1/3223 - Release Date: 10/27/10 19:12:00************************************************************* To unsubscribe or set your subscription options, please go to http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1 ----- No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1153 / Virus Database: 424/3225 - Release Date: 10/28/10 ************************************************************* To unsubscribe or set your subscription options, please go to http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
|