[FWDLK] Fw: [?? Probable Spam] [FWDLK] Tubes
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[FWDLK] Fw: [?? Probable Spam] [FWDLK] Tubes



----- Original Message ----- From: "Gary Pavlovich" <glpavlovich@xxxxxxx>
To: "Matt Proske" <mproske@xxxxxxxxxxxxx>
Sent: Thursday, October 28, 2010 10:31 PM
Subject: Re: [?? Probable Spam] [FWDLK] Tubes


Matt,

Thank you for the picture.

I need to know which copper tube is connect to that bent rubber hose, the straight copper tube or the curved copper tube. By looking under the dash at the heater valve, there is a wire from the heater valve leading into the heater shroud/box; is that wire originating at the top of the valve or the bottom of the valve?

Thank you,
Gary
----- Original Message ----- From: "Matt Proske" <mproske@xxxxxxxxxxxxx>
To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Thursday, October 28, 2010 5:10 PM
Subject: [?? Probable Spam] [FWDLK] Tubes


As shown in the image, mine has the bent tube on bottom.


*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.