Does anyone make the
"portawalls" anymore?
Bill da "Magnumguy" Racine, Ohio Proverbs 3:5-6
Hiya!
Try looking at www.coker.com.
They have a good period chart for the different sizes of whitewalls,
if you aren't sure about what size you need. I would strongl;y recommend
going with the wide whites instead of a modern tire - the difference in
appearance is really remarkable.
Although they tend to be more
expensive, I would also recommend the correct bias-ply (non-radial) tires.
They have a different, taller profile. Modern radials will look a
little wrong, even with the wide whitewalls that are available. I have a
1959 Dodge Coronet, and the difference I saw between modern radials and
bias-ply was amazing. Performance isn't really an issue -
but I imagine the bias-play will not last as long. Of course, these cars
usually aren't daily drivers, either, and few of us put 15K miles a year on
our Forward look cars.
Some cost savings tips - If your car is not for
show, check out Blemished tires. There is never a structural problems,
and most of the blemishes are invisible to the average person. Also,
check out your area for major car shows and find out when the tire
manufacturers will have displays set up. Often, they will bring ordered
tires to a show and save you the shipping. And they also have a good
selection, so you can buy direct.
If you can't make it to the show,
check around with your car club friends - I had tires picked up at Hershey by
a friend who went there.
Good luck with your car!
Bob
|