Re: [FWDLK] Carb question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Carb question



I'm just wondering if bead blasting this sort of thing would be a solution?
Jack  in January thaw Shinglehouse, Pa

> Group,
>
> I am in the process of rebuilding my carb and have a quick question.   I
> have torn the carb down to the three main components (air horn, body,
> and valve body).   My question is; I have soaked the body in carb
> cleaner for a couple of hours and have rinsed it with very hot water.
> There is a chalky residue in some places on the outside of the carb.
> How do I dress this down?   Did I soak it in the carb cleaner too long?
> Also, there is surface rust on the top layer of some of the vales.
> Should I attempt to remove this, and if so how would you recommend?
>
> As always, thank you for your most considerate replies,
>
> Greg Filtz
> 56 Dodge Royal Lancer
>



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.