[FWDLK] Carb question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[FWDLK] Carb question



Group,

I am in the process of rebuilding my carb and have a quick question.   I
have torn the carb down to the three main components (air horn, body,
and valve body).   My question is; I have soaked the body in carb
cleaner for a couple of hours and have rinsed it with very hot water.
There is a chalky residue in some places on the outside of the carb.
How do I dress this down?   Did I soak it in the carb cleaner too long?
Also, there is surface rust on the top layer of some of the vales.
Should I attempt to remove this, and if so how would you recommend?

As always, thank you for your most considerate replies,

Greg Filtz
56 Dodge Royal Lancer



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.