Re: [FWDLK] both rear wheel wells repaired all the way around
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] both rear wheel wells repaired all the way around eachone 56Dodge Status - Custom repair parts



Or you may want to try this guy for patch panels too. He had lots of panels
available for 57 Plymouth anyway. Those wheel arches were only about $75 .
BILL?S SPEED SHOP,13951 MILLERSBURG ROAD, S.W. NAVARRE, OHIO, 44662,PH
330-832-9403,FAX330-832-2098
Call him up-he is easy to talk to.
Glenn Barratt,
57 Fury,
Still sunny Auckland, New Zealand.

Richard wrote:

> Why don't you buy quarter panel patch panels from Black Car in Edina, MN?
> Seems a waste to roll your own.
>
> Richard Main
>
> ----- Original Message -----
> From: "Scott H" <kneedrager@xxxxxxxxxxx>
> To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
> Sent: Thursday, January 25, 2001 9:24 AM
> Subject: [FWDLK] 56 Dodge Status - Custom repair parts
>
> > Well my 56 Dodge Custom Royal Lancer project is proceeding.
> > I finished removing the dozen or so little items (trunk and door
> > weatherstrip, assorted rubber bumpers, door locks, etc, etc, etc)
> > It goes to the paint stripper on Saturday (THANKS Nick!)
> >
> > I spent some time last night talking with the owner of the metal shop that
> > will do the sheetmetal repair.
> > I need both rear wheel wells repaired all the way around each one.
> Actually
> > the passenger side is in pretty good shape but the drivers side is mostly
> > dust in the wind. He may need to make a wood form from the passenger side
> in
> > order to get the contour correct on the drivers side.
> > If anyone else is in need of these sections and is interested in getting
> > them made let me know. He usually does one-off stuff but may be willing to
> > make a few sets if there is any demand.
> >
> > Likewise the unobtainable and elusive aluminum door sill plates can be
> hand
> > made from aluminum. Special dies would have to be hand made and  it may be
> > cost prohibitive for me to do just one set but again if there is interest
> it
> > may pay to have him do a few sets. Let me know if anyone is interested.
> >
> > I am still looking for a paint shop, I found only 2 places, that are not
> big
> > $$$$ restoratino shops, that are even willing to talk to me.
> >
> > Scott
> >
> >
> >
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at http://explorer.msn.com



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.