Same basic process on every car I've ever worked
on. Push in at the lower front of the lower seat cushion, lift it up and
you can see some kind of fasteners holding the back seat cushion down.
When those are removed, the seat back will slide up.
KerryP Patch panels fabricated Pinkertonk@xxxxxxxxx dte.net/57imperial Imperials
-- 50 Limo, 57 roadster, 61's, 64, 68 Convert, 73, a 66 300 and a bunch of
lesser marques
----- Original Message -----
Sent: Wednesday, March 12, 2003 3:54
PM
Subject: Re: IML: Removing the rear seat
on 1958 4-door sedan
Would this procedure apply to seat removal on a
60 ?
Clay Smith
67
Crown Coupe
60 Custom ( soon to have seatbelts installed)
----- Original Message -----
Sent: Tuesday, March 11, 2003 11:24
AM
Subject: Re: IML: Removing the rear
seat on 1958 4-door sedan
Get in the floor of the back seat and
push IN at the bottom of the lower cushion. There is a clip on each
side at the bottom. When you push in that side should go back about an
inch then you can lift it up. When you get both sides loose it will
pull up and out. You can then see some (2 to 4) bolts that hold the
seat back in place. Remove them and slide the seat back straight
up. There are come tangs that hold it in place as part of the
body. You can see them from the trunk if your cardboard is not in the
way.
KerryP Patch panels fabricated Pinkertonk@xxxxxxxxx dte.net/57imperial Imperials
-- 50 Limo, 57 roadster, 61's, 64, 68 Convert, 73, a 66 300 and a bunch of
lesser marques
----- Original Message -----
Sent: Tuesday, March 11,
2003 9:33 AM
Subject: IML: Removing the
rear seat on 1958 4-door sedan
Hello all,
What's the trick to remove the rear seat
of a 1958 4-door sedan ? Where are the screws ?
Thanks for the
help,
Regards,
Frédéric 1958 Imperial 4-door
sedan France
______________________________________________________ Boîte aux
lettres - Caramail - http://www.caramail.com
|