Get in the floor of the back seat and push IN
at the bottom of the lower cushion. There is a clip on each side at the
bottom. When you push in that side should go back about an inch then you
can lift it up. When you get both sides loose it will pull up and
out. You can then see some (2 to 4) bolts that hold the seat back in
place. Remove them and slide the seat back straight up. There are
come tangs that hold it in place as part of the body. You can see them
from the trunk if your cardboard is not in the way.
KerryP
Patch panels fabricated Pinkertonk@xxxxxxxxx dte.net/57imperial Imperials -- 50 Limo, 57 roadster, 61's, 64, 68 Convert, 73, a 66 300 and a bunch of lesser marques
|