83 EFI answers

["Neil Thorpe" <nt014b6628@xxxxxxxxxxxxxxxx>]

Leo,

 

Be brave pull them out and have a look at them, there is an o ring

that locates them around the bottom of the valve. Without any o rings the fuel

would flow around the valves instead of through the valves once the spring

tension has been overcome. When you get the valves out you will notice that

one valve is harder to compress than the other.

 

Neil Thorpe 82 Imp

----- Original Message -----

From: Leo Heligas

To: mailing-list@xxxxxxxxxxxxxxxx

Sent: Thursday, January 02, 2003 3:01 AM

Subject: Re: IML: 83 EFI answers

Neil,

Should those two valves have an o ring around the top of them?. There is a groove around them near the top that looks like it should have an o ring. If they are supposed to, mine never had them! I assume the valves must have an o ring farther down because they act like they are stuck. I can move them from side ti side but not up and out.

Leo