Thanks for the tip! my oil pressure gauge is also broke, along with the amp
meter gauge. How would i repair these?
>
>If you have a fuel gauge that doesnt read full after filling it up,check
>the sender unit at the tank.The connection between the wire and the stud it
>plugs into can become corroded.Corrosion is resistance and the gauge reads
>resistance.Take some WD-40 or something similar,remove wire from stud on
>tank,spray both the stud and inside the wire connector,then push the
>connector on and off a couple of times.This loosens the corrosion.To stop
>the connector from developing more corrosion in it coat the connector with
>Dielectric grease.
>Tony 1972 Imperial LeBaron(Genie)
> 1987 Chrysler LeBaron(Teenie)cause she is!
_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
Back to the Home of the Forward Look Network