Well I finally had time to try and get my servo
working.When I got it off I found a big crack in the main body.I decided to go
with the idea of bypassing the servo with the water hoses.I connected the 2
hoses from the motor to the 2 hoses from the firewall.In one of the hoses I put
a open/close valve.Everything is good(no leaks) but when I open the valve to
allow water to heater I cant get the heater blower to start.Any ideas what I may
have done wrong or is that normal.
Tony 1972 Imperial LeBaron(Genie)
1987
Chrysler LeBaron(newly named Teenie-Cause she is)
|