68 trunk release
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

68 trunk release



D,

My 70 LeBaron has two plastic vacuum reservoirs with check valves.  Both
are located on the back side of the radiator support, passenger side.
One keeps the trunk release system happy; the other is for the Auto-Temp
system.

Vacuum source hoses come off a fitting at the back of the intake
manifold, run along the cowl, then over the passenger side inner fender
to the reservoirs.  Vacuum lines then reverse direction and head back
over the inner fender and pass through the firewall grommets.

Your car may use the juice can reservoirs.  They may be mounted to the
inner fender or rad support.

Pete in PA

From: dardal@xxxxxxxxxxxxxxx
Subject: Re: IML: 68 trunk release?
Date: Sun, 21 Jul 2002 22:22:18 -0500 (CDT)
Reply-To: mailing-list@xxxxxxxxxxxxxxxx
In that case, my accumulator is leaking.  My trunk will certainly not
going to
release with engine off.  May be thats the source of the rough idle.
Does
anybody know where that accumulator is located?




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.