Wire wheel cleaning
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Wire wheel cleaning



On my now departed Blue low mileage 81, I fought this problem until I was
blue, in the face.  Finally, I took the wheel covers all the way apart, all
96 pieces per wheel!   Cleaned and waxed every one;  they looked marvelous
(for a little while).  Actually, they looked new for about a year after
that, because the crud rolled off pretty easy every time I washed the car.

Dick Benjamin
----- Original Message -----
From: <Imp1983@xxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Thursday, June 20, 2002 9:26 AM
Subject: IML: Wire wheel cleaning


> Hi list,
>
> Any good ideas on cleaning the INSIDE part of wire wheels WITHOUT taking
them
> apart?
>
> I'm bringing the Beige Barge to Carlisle, and I want, the wheels at least,
to
> look good.  Just make sure you stand a good 20 feet or more away when you
> look at the car itself.  ;-}
>
>
>
> Dan Wing
> Imp1983@xxxxxxx
>
> 83 Imp, beige, wire wheels,
> factory/dealer carb conversion
>
>


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.