Tamper resistant screws-81
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Tamper resistant screws-81



I am attempting to remove radio from my 1981 Imperial... Must be original equipment because it's held in place by two tamper-resistant screws.  The heads are tapered, with three slots, between 7 and 8 mm wide.  They are not torx, and have been very resistant to my attempts to tamper with dremel, vise grip, hammer and awl, etc.  Local dealer says they do not have socket in their tool box, and haven't had luck at Napa, Radio Shack. 

Does anyone have any ideas on a supplier for such a socket, or alternative means of removal? 

Thanks,

Dave Morrison, 81 EFI, 82 FS EFI

 



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.