He has plain old fashioned po' folks type AC, not ATC - I just heard from him in a private message. But he apparently has no manual for it, and I don't either. Probably, the high speed relay isn't getting it's drive signal in the heat/def position, but I need a wiring diagram to figure out for sure if this is normal or a malfunction. For one thing, it may be normal for the high speed not to work in other than AC. That is the way the ATC control system works, for instance, as the super-duper blower speed isn't needed for heat/def. Dick Benjamin ----- Original Message ----- From: <mopar2@xxxxxxxxxx> To: <mailing-list@xxxxxxxxxxxxxxxx> Sent: Monday, March 25, 2002 7:18 PM Subject: Re: IML: Fan Speed! 67 4dr HT > If you have the Autotemp system, It decides what fan speed you need for the > given conditions. Does it change any if you set the dial for more heat? > John > > Szpakoochee@xxxxxxx wrote: > > > Hi: > > Would anyone on the list know why my blower fan works fine on all three > > speeds for the A/C, but only on low and medium for the heater and defroster? > > Thanks Kent. > >