firing position
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

firing position



A basic tuneup on our pre-computer cars, consists of points and plugs, and
if needed, adjustment of the carbureator. Also checked at this time, the pcv
if equipped, the tightness of the carb and intake manifold,  the condition
of any vacuum lines including the big vacuum feed for the power brake
booster, and a general inspection of the under hood area for leaks and other
general problems. But a basic tune up should get a minimum of points and
plugs changed, and timing checked and reset, if needed, after the parts are
installed.
----- Original Message -----
From: "Jason Slaten" <jasonslaten@xxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Monday, February 25, 2002 3:00 PM
Subject: IML: firing position


> what is the original firing position for my '71 Imperial Labaron 4 dr. hrd
> top...i am going to get a tune up...and i need the original specs...it
used
> to be on Elijahs page...but his page is gone...please help
>
> and what exactly does a tune up consists of....
>
>
>
>
> _________________________________________________________________
> Send and receive Hotmail on your mobile device: http://mobile.msn.com
>
>
>


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.