Re: IML: Carbs and manifolds
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: Carbs and manifolds



If memory serves me, the intakes pre-67 are all small bolt pattern AFB. 67-70 used Holley 4160 type carbs(larger bolt pattern) Some 71's had a carter AVS.(I had one)And after that, it was changed to the Carter Thermo-Quad spread bore type. The height of the intake also changed, newer versions were higher.The choke wells also changed, in some carb, intake combinations this could be an issue.If , I'm missing something , I'm sure someone will will add to the facts.Thanks, Ya'll have nice day, Dave.
 
-------------- Original message --------------
From: FltSgt@xxxxxxx

> Hola Witness Protection Person ( No Name )
>
> What year of car/engine did you switch the 1967 - 1970 intake manifold to ???
>
> Uncle Rodger & Aunt Gabby
> Colo Spgs
>
>
> ----------------- http://www.imperialclub.com -----------------
> This message was sent to you by the Imperial Mailing List. Please
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
> shared with everyone. Private messages (and attachments) for the
> Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.