When I put on my right hand mirror I just measured the distances to the
screw holes on the driver side mirror and transfered those mesurements to the
right. Worked perfect, good luck! measuring from two fixed spots to the
same hole guarantees you will get the right spot through triangulation.
Measure three or four times just to be positive. I am sure you know all
this but endulge me. be sure to mark you spots with some type of tape and
drill through the tape, this will reduce chipping of the paint and put a dab of
paint ( or some other type of sealer) on the hole to reduce rust at that
point.
Chris M.
|