Re: IML: Valve/Head Cover Gasket question

[RandalPark@xxxxxxx]

I replaced the right side valve cover on my '62 recently. All I did was replace the gasket. There were no other parts included. Maybe the package you have was a "valve seal set" which would include both the valve seals and the valve cover gasket. Other than that I don't know why you have the extra parts.

Paul

In an email dated Fri, 14 1 2005 4:46:09 pm GMT, JosephStil@xxxxxxx writes:

>Howdy all:
>
>I asked this question several days back but hadn't heard an answer so I thought I would have another crack at it.
>
>I am replacing the valve cover gaskets on the 413 to help prevent what appears to be an oil leak causing some smoking (it could also be an exhaust leak, but one thing at a time...).
>
>Anyway, the new gaskets come with 8 grommets made of the same material as the gasket, two grommets for each stud. ?These things are like rubber washers.
>
>I can't figure out how these are installed with the gasket if at all. ?When I removed the valve covers and the gasket, there weren't any grommets used at all. ?The only thing used were a couple of metal washers (and not for each bolt, at that).
>
>Do I lay the gasket down, install the valve/head cover, then put the two grommets on the stud and tighten down the hex nut to the bolt? ?
>
>Do the grommets go between the gasket and the cover somehow?
>
>Do I toss them in the trash bin?
>
>If there is someone on the list who knows, please send me your advice.
>
>Thanks everyone!
>
>Joe
>Allen Texas
>'61 Crown 4D Southampon
>
>
>----------------- ?http://www.imperialclub.com ?-----------------
>This message was sent to you by the Imperial Mailing List. Please 
>reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
>shared with everyone. Private messages (and attachments) for the
>Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
>To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>
>


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm