Re: IML: Troubleshooting
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: Troubleshooting



John thanks, sadly I have a new voltage regulator. I had that replaced
when I had my engine rebuilt.


--- Johnemory@xxxxxxx wrote:

> Ken:
> 
> I had the same problem on my '56, and found out that the voltage
> regulator 
> was sticking. A good tap on the shell will unstick it, but the problem
> may 
> recur. It's an easy task to remove the shell and clean the contact
> points. I havn't 
> had the problem since.
> 
> John Emory
> Rio Rancho (formerly Santa Fe) New Mexico
> '56 4 door S'hampton
> 



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.