|
to b&t roddick and elijah,
the napa seal numbers are 8017 for the case
seal and 1-3308 for the small seal on the top
of the shift shaft under the e-clip& washer.
i see that steve has posted that there is a tool
available to replace the case seal without removal
of the valve body.
hopefully that will work for you as it will save alot of time. just be certain that the seal goes down
flat to the case and not crooked as it will leak.
sometimes the clearance to work down at the side is not to good.
good luck in your repair
frank
|
Back to the Home of the Forward Look Network