68 t-bars

["BOBSMOPAR" <bobsmopar@xxxxxxxxxxxxxx>]

Hi all.
I looked at the new bar again and I told you the wrong number it is a 512r.
And above that it has BTA.
Thank you.
Bob
----- Original Message -----
From: "Bill Watson" <wwatson@xxxxxxxxx>
To: "Imperial Owners Club" <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Wednesday, March 03, 2004 7:27 AM
Subject: Re: IML: 68 t-bars


>
> Looks like your right bar is a left.  The right bar should be an even
> number.  Bars can be installed either end front/back, but there is a right
> and a left.
>
> The three digits are the last three numbers of the part number,  Cannot
> locate a bar ending in 317 or 217.
>
> However, the standard bars should be 510 (R) and 511 (L) while the
> heavy-duty bars should be 516 (R) and 517 (L)
>
> A bar stamped 522 will not fit an Imperial - it is for a Dodge Polara or
> Monaco.
>
> Bill
> Vancouver, BC
>
>
>
> ----- Original Message -----
> From: BOBSMOPAR
> To: mailing-list@xxxxxxxxxxxxxxxx
> Sent: Tuesday, March 02, 2004 7:17 PM
> Subject: IML: 68 t-bars
>
>
> Hi All.
> Tonight I pulled the isolator bar out of the Imperial.
> I then tried to turn the bars a little to mate them to the adjusting bolts
> but they would not move do I need to loosen the nuts that hold the lower a
> arms on the cross member.
> I also checked the numbers on the bars.
> On the right one it has stamped on it 317.
> On the left one it has a L and 217 on it.
> I have one nos bar  for the right side it is stamped 522 R can I use 1new
> bar and 1 old bar on this car.
> Thanks for any help you can give.
> I thank all that replied so far.
> This list has been a great source for info and parts.
> Bob
> 68 Imperial
>
>
>