Hi All.
Tonight I pulled the isolator bar out of the
Imperial.
I then tried to turn the bars a little to mate them
to the adjusting bolts but they would not move do I need to loosen the nuts that
hold the lower a arms on the cross member.
I also checked the numbers on the
bars.
On the right one it has stamped on it
317.
On the left one it has a L and 217 on
it.
I have one nos bar for the right side it is
stamped 522 R can I use 1new bar and 1 old bar on this car.
Thanks for any help you can give.
I thank all that replied so far.
This list has been a great source for info and
parts.
Bob
68 Imperial
|