55 Dodge Truck
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

55 Dodge Truck



Hey Reverend,

THANKS for the link, the "stats", and the pics !!!

I enjoyed reading about the truck and checking out the Fall Fling pics !!

Please keep us posted on your projects and any upcoming Chrysler/Mopar events, I'd like to drive down to next years festivities !!!

Cheers,

Michael Howlett

Boring Oregon

 



 

>From: "Howlett, Michael"
>To: "'collyman1@xxxxxxxxxxx'"
>Subject: FW: 55 Dodge Truck
>Date: Fri, 5 Dec 2003 07:58:37 -0800
>
>
>
>-----Original Message-----
>From: The Reverend [mailto:reverend@xxxxxxxxxxxxx]
>Sent: Thursday, December 04, 2003 11:15 PM
>To: Multiple recipients of MoPar
>Cc: mailing-list@xxxxxxxxxxxxxxxx
>Subject: IML: 55 Dodge Truck
>
>
>http://www.robdiesel.com
>
>Enjoy it folks, that's me in the supercharged '55 Dodge truck playing around
>in a quiet parkinglot! (making the owner nervous)
>The camera picked up the roar and beltwhine quite well!
>
>  The driveline is a 440 bored .030 over, 8:1 pistons with 6pack rods,
>balanced and all parts matched (incl ports) with a Mooneyham 6-71
>supercharger with dual Holley's on top calibrated to match both
>engine and eachother.  Behind that is a 4 speed that leads to a 3.55
>suregrip and ends in two Mickey Thompson 15/60/295s.
>
>  The engine was dropped down and back a bit to lower the center of gravity
>and to fit the blower under the stock hood. The frame was boxed and
>reinforced with various crossbeams so it wouldn't bend too much under power.
>
>  The ignition is an MSD 6AL limited at 6000rpm with the ignition system on a
>separate and easy to remove plate under the dash. Bulkhead connector and
>engine/headlight harnesses are custommade of burnproof wire (can't
>melt the insulation if you try!) wrapped in a nylon mesh 'tube' to protect
>it
>even further, this is tied together with weatherproof  quick disconnects.
>
>  The steeringcolumn is out of a '67 Imperial and is a tilt-a-scope column,
>the pedal assembly is out of a mid-60's Dodge truck and it bolted right in.
>The power doorlocks and windows are out of a 1991 Chrysler LeBaron along
>with the flush doorhandles and inside controls.
>
>  The runningboards are RhinoLined as is the firewall on the engineside and
>the inside of the cab.
>
>  Carl
>http://www.robdiesel.com
>
>
>
>
>-----------------  http://www.imperialclub.com  -----------------
>This message was sent to you by the Imperial Mailing List. Please
>reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
>shared with everyone. Private messages (and attachments) for the
>Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
>To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm


Don’t worry if your Inbox will max out while you are enjoying the holidays. Get MSN Extra Storage!

Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.