imperial starters?

["Phil Patterson" <hilljack7@xxxxxxxxxxxxx>]

I'm believe they won't interchange. Chrysler changed from an iron case to an aluminum case on their Torqueflite transmissions in 62. The iron and aluminum torqueflites used different starters, so this means that a 1965 383 starter won't work on a 1960 413, sorry.

 

The pulleys should swap, as long as the alternator shafts are the same. Be sure to use a proper puller when removing the pulley. You should probably disassemble the alternator so you can support the shaft when you press the new pulley on. This would be a good time to check the condition of the bearings, and other parts, as well as freshen up the grease in the alternator.

Phil <><

----- Original Message -----

From: GasPumpCity@xxxxxxx

To: mailing-list@xxxxxxxxxxxxxxxx

Sent: Monday, September 09, 2002 12:39 PM

Subject: IML: imperial starters?

hi list! went to a recent closeout on Chrysler garage and picked up starter and alternator nos.can anyone tell me if a starter for a 65 Newport 383 will fit my 60 imperial 413? also can single pulleys be removed on the alternator and be replaced with double pulleys? larry6064