Can you make the pot metal half-gears that operate the wind
wings?
Lupe 60 Thunderbird Hard Top 64 Imperial Crown Coupe
----- Original Message -----
Sent: Wednesday, February 13, 2008 6:39 PM
Subject: Re: IML: Electric Window Repair
Friend, you make them and we'll buy them. If a gear hasn't broken or
stripped, it will. I have a '64.
--------------
Original message -------------- From: SREYDRD@xxxxxxx
hi,
If this is a fairly common problem and fits several years , we
could possibly make an injection mold I manufacture it .. I have
access milling an injection molding equipment,. I would need to hear from
more club members about possible quantities though. Let me know if there
is some interest.
Thanks
Russ
61impcoupe
In a message dated 2/13/2008 10:02:39 A.M. Mountain Standard Time,
imperialken@xxxxxxxxx writes:
I'm
usually pretty good about finding resources for parts and repair stuff,
but today, I'm drawing a blank. (I'm sure it has a lot to do with age,
mine not the Imperial's)
The driver side electric window on my 67
Crown quick working recently. I was able to move the window up and down
manually so I suspected the plastic gear in the motor housing was
broken. After taking it apart last night I discovered my suspicions
were correct.
I remembered seeing posts from other members regarding
this topic in the past and the mention that repair kits were available at
one of the major-chain parts houses like Kragen or Napa. Well I
unsuccessfully searched Kragen, RockAuto, PartsAmerica and Napa. I
got nothing. Then I searched the club web site looking for information
regarding electric window repair and again I turned up nothing. I'm
sure the information is there, it's just a user-interface issue.
(me the user, not interfacing well with the computer)
Does someone
with a memory better than mine know where I can find that little plastic
gear?
Thanks
Ken 67 Crown 4 Dr Ht 68 LeBaron 4 Dr
Ht
----------------- http://www.imperialclub.com
----------------- This message was sent to you by the Imperial Mailing
List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response
will be shared with everyone. Private messages (and attachments) for
the Administrators should be sent to iml.webmonster@xxxxxxxxx To
UN-SUBSCRIBE, go to
http://imperialclub.com/unsubscribe.htm
|