Re: IML: Electric Window Repair

["dansgarage@xxxxxxxxxxxxxx" <dansgarage@xxxxxxxxxxxx>]

Hi George....regarding the graers for the power windows...do you happen to know if the ones you made for the 1960 Chrysler also fit other year Imperials & Chryslers? and what is the approx. cost for a set od (4) gears??
Thanks
Dan Melnik



---- georgelaurie@xxxxxxxxxxx wrote: 

=============
I do make new cogs for the 1960 chrysler, maybe they are the same?  I make 
them from machineable resin with a wire moulded inside for extra strength. 
When I had my F years ago I remember the cogs broke in half. So if they are 
the same cog  ( 28 angled theeth and steps on the inner )  I do make them, 
regards George.
georgelaurie@xxxxxxxxxxx
----- Original Message ----- 
From: "Ken Lang" <imperialken@xxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Thursday, February 14, 2008 2:28 AM
Subject: IML: Electric Window Repair


> I'm usually pretty good about finding resources for parts and repair
> stuff, but today, I'm drawing a blank. (I'm sure it has a lot to do
> with age, mine not the Imperial's)
>
> The driver side electric window on my 67 Crown quick working recently.
> I was able to move the window up and down manually so I suspected the
> plastic gear in the motor housing was broken.  After taking it apart
> last night I discovered my suspicions were correct.
>
> I remembered seeing posts from other members regarding this topic in
> the past and the mention that repair kits were available at one of the
> major-chain parts houses like Kragen or Napa.  Well I unsuccessfully
> searched Kragen, RockAuto, PartsAmerica and Napa.  I got nothing.
> Then I searched the club web site looking for information regarding
> electric window repair and again I turned up nothing.  I'm sure the
> information is there, it's just a user-interface issue.  (me the user,
> not interfacing well with the computer)
>
> Does someone with a memory better than mine know where I can find that
> little plastic gear?
>
> Thanks
>
> Ken
> 67 Crown 4 Dr Ht
> 68 LeBaron 4 Dr Ht
>
> -----------------  http://www.imperialclub.com  -----------------
> This message was sent to you by the Imperial Mailing List. Please
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
> shared with everyone. Private messages (and attachments) for the
> Administrators should be sent to iml.webmonster@xxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>
> 


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm