Fellow Imperialists, I wanted to clarify that when the engine is hot, the Reverse button will not engage. I push the Reverse button, and it will go in, but the Neutral button does not pop out. Also, the transmission does not shift gears; it stays in neutral. Now, with both Neutral and Reverse pushed in, if I push the Neutral button, the Reverse button pops out. Now in Neutral, if I try to shift into any other gear, it works correctly. The button goes in, Neutral pops out, and the transmission shifts gears. If the engine is cold, the push buttons work as they are supposed to. Reverse pushes in, Neutral pops out and the transmission shifts into reverse. Thanks, Graham Quimby 62 Caramel Crown 2 Dr Hardtop ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to iml.webmonster@xxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm