Re: IML: 1960 ignition switch
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: 1960 ignition switch



It is possible that is the reason for the difference. Running changes were made through the production year. If it has the same number of leads and you are sure that it is original, you should be able to splice in your old connector.
 
Paul W.
 
 
-----Original Message-----
From: DReese@xxxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Mon, 25 Sep 2006 7:50 AM
Subject: IML: 1960 ignition switch

Does anyone know why there would be different electrical connector 
configurations on the back of the ignition switch between two different cars?

I'm replacing my burnned up wiring harness with one from Bob.  My car has an 
alternator, the replacement harness came from a car with a generator.  Could 
that be the difference?

Thanks,
Donn Reese
1960 Custom 4dr HDTP




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm

Check out the new AOL. Most comprehensive set of free safety and security tools, free access to millions of high-quality videos from across the web, free AOL Mail and more.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.