Re: IML: 60 Imperial reflectors
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: 60 Imperial reflectors



No problem Henry,

But I was referring to the disc on the trunklid, you know the one that is
covered with the transparant trunklid emblem (that I bought actually from
George Laurie).
Unfortunately he doesn't reproduce the reflector...

Robert

Op Wo, 2 augustus, 2006 5:36 am, schreef Henry Hopkins:
> Are you talking about the chrome pieces that surround a red plastic
> reflector on the tips of the rear fins???  If so, when you get the chrome
> piece fixed, George Laurie Georgelaurie@xxxxxxxxxxx makes reproduction
> reflectors that are superb.
>
> If you are not talking about those pieces, excuse me for the intrusion.
>
>
> Henry Hopkins, 60 cvt.
> ----- Original Message -----
> From: "Regis Bodnar" <arbie104@xxxxxxxxxxx>
> To: <mailing-list@xxxxxxxxxxxxxxxx>
> Sent: Tuesday, August 01, 2006 7:05 PM
> Subject: RE: IML: Looking for a potmetal repair shop in the New York area
>
>
>
>> Paul's Chrome in Evans City, PA can repair it and re-plate it...they
>> are not cheap, but guarantee everything for life and use show quality
>> chrome.
>>
>> -----Original Message-----
>> From: mailing-list-owner@xxxxxxxxxxxxxxxx
>> [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of Rob van der Es
>>  Sent: Tuesday, August 01, 2006 2:03 PM
>> To: mailing-list@xxxxxxxxxxxxxxxx
>> Subject: IML: Looking for a potmetal repair shop in the New York area
>>
>>
>>
>> Hi fellow imperialists!
>>
>>
>> I am trying to restore a trunklid reflector for my 1960 Imperial, my
>> fried and fellow IML member Charles Rex (who also ownes a 1960 Imp) has
>> obtained a reflector from Lowell but this one is heavily pitted.
>>
>> This became visible after removing the old chrome plating.
>> What I am looking for now is a shop that can repair the pinnholes and
>> some craters in the potmetal. After the repair it can be copper plated
>> and rechromed by any plating company, but the problem is that not many
>> know how to repair pot metal..
>>
>> Does anyone know a good repair shop in the New York area that can
>> handle potmetal (zamac) ?
>>
>> Thanks in advance,
>>
>>
>> Robert van der Es
>>
>>
>>
>>
>> -----------------  http://www.imperialclub.com  ----------------- This
>> message was sent to you by the Imperial Mailing List. Please reply to
>> mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with
>> everyone. Private messages (and attachments) for the Administrators
>> should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to
>> http://imperialclub.com/unsubscribe.htm
>>
>>
>>
>>
>> -----------------  http://www.imperialclub.com  -----------------
>> This message was sent to you by the Imperial Mailing List. Please
>> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared
>> with everyone. Private messages (and attachments) for the Administrators
>> should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to
>> http://imperialclub.com/unsubscribe.htm
>>
>>
>>
>
>
>
> -----------------  http://www.imperialclub.com  -----------------
> This message was sent to you by the Imperial Mailing List. Please
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared
> with everyone. Private messages (and attachments) for the Administrators
> should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to
> http://imperialclub.com/unsubscribe.htm
>
>
>




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.