RE: IML: speedo cable for 1960 Imperial
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: IML: speedo cable for 1960 Imperial



Thanks Bill,

But I hope I can find a complete assembly, it isn't too easy to point out
to a NAPA representative what parts I need by telephone ( I live in the
Netherlands you see?)

But I will keep your suggestion in mind!

Thanks,

Robert


Op Vr, 9 juni, 2006 12:06 am, schreef WCR:
>

> If you cannot find a new one, I think NAPA still carries cable housings,
> wires, tips, fittings, and sleeves so you can build your own from scratch.
>  They would be in their Balkamp replacement parts books.
>
>
> Good luck.
> Bill
>
>
>
> -----------------  http://www.imperialclub.com  -----------------
> This message was sent to you by the Imperial Mailing List. Please
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared
> with everyone. Private messages (and attachments) for the Administrators
> should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to
> http://imperialclub.com/unsubscribe.htm
>
>
>




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.