Re: IML: Edelbrock Carburetor; was re: PN for voltage regulator and Carb
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IML: Edelbrock Carburetor; was re: PN for voltage regulator and Carburator.
- From: "JAY D'ANGELO" <cadij@xxxxxxxxxxx>
- Date: Wed, 17 May 2006 16:42:19 +0000
If you installed a new Edelbrock on your car, let me know how you managed to
get the linkage to work properly. I put one on my 64 and it is great, but
the shift down linkage rod configueration still won't allow me to get
passing gear - when I align it to do so, it hits the firewall and prevents
the secondaries from opening.
Jay D'Angelo
64 Iml Cvt
Las Vegas
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network